1969 Ford Bronco Wagon Sport Utility 2-door 5.0l on 2040-cars

Auto blog

2015 Ford Mustang EcoBoost loses big power on 87 octane

The 2015 Ford Mustang with the 2.3-liter EcoBoost four-cylinder is a pretty potent package on paper. With 310 horsepower and 320 pound-feet of torque, it boasts better performance numbers than the 3.7-liter V6, but with better fuel economy as an added benefit. However, if you're in the market for one of these boosted 'Stangs, you should probably keep in mind that it really prefers to gulp premium, 93-octane fuel. It can drink 87-octane swill in a pinch, but you're going to find significantly less power underfoot when pulling away. While it's not shocking that the ponies are dialed back with a lower grade of gasoline, an alleged page from a Ford training manual obtained by Mustang 6G purports to show just how much power is lost, though. According to this document, the 2.3-liter EcoBoost makes 275 horsepower and 300 pound-feet of torque when running on lower octane fuel. That's a substantial reduction of about 11.3 percent compared to when the engine drinks 93 octane. Interestingly, according to Mustang 6G, that finding was a bit better than expected, because a Ford engineer reportedly said power would be down about 13 percent without altering peak torque. In speaking with Autoblog, Paul Seredynski of Ford powertrain communications, objected to part of this document. While he couldn't confirm the specific losses listed for the Mustang EcoBoost, "torque remains unchanged" with lower octane gasoline, Seredynski said. He speculated this training manual page was "possibly from before the engine was certified" and therefore showed incorrect figures. Serendynski did confirm that the automaker recommends using 93 octane, and like all modern engines, the software adapts if it's lower. "Peak power would be reduced" by using a lesser grade, he confirmed. Featured Gallery 2015 Ford Mustang EcoBoost: First Ride View 20 Photos News Source: Mustang 6GImage Credit: Copyright 2015 AOL, Ford, Mustang 6G Ford Technology Convertible Coupe Performance ecoboost ford mustang ecoboost

2014 Ford Transit unveiled in Chassis Cab and Cutaway versions

As a leader in commercial vehicles here in the US, we knew Ford wouldn't take too long to show off the chassis cab and cutaway versions of its 2014 Ford Transit van. Set to go on sale this fall, Ford already revealed the full-body version of the Transit, and now it has pulled the cover off exposed-frame models just in time to to compete against the all-new Ram Promaster.
The term "chassis cab" refers to models with a fully enclosed cabin used for box vans or rental trucks, while cutaway models leave the cabin open behind the B-pillars for a pass-through on vehicles such as Class C motorhomes or ambulances. Both will offer three wheelbase options (138, 156 and 178 inches), the choice of single or dually rear axles, and plenty of upfitter-friendly touches including a pre-wired body harness and multiple body mount locations.
The new design will also help make upfitting a little easier since the fuel filler is now built into the cab (just behind the driver's door). Those integrated fuel filler necks will serve to feed either a 3.7-liter V6, a 3.5-liter EcoBoost V6, or a 3.2-liter Power Stroke diesel. Transit chassis cab and cutaways will wear varying Gross vehicle weight ratings from 9,000 pounds to 10,360 pounds depending on spec.

Car Stories: Owning the SHO station wagon that could've been

A little over a year ago, I bought what could be the most interesting car I will ever own. It was a 1987 Mercury Sable LS station wagon. Don't worry – there's much more to this story. I've always had a soft spot for wagons, and I still remember just how revolutionary the Ford Taurus and Mercury Sable were back in the mid-1980s. As a teenager, I fell especially hard for the 220-horsepower 1989 Ford Taurus SHO – so much so that I'd go on to own a dozen over the next 20 years. And like many other quirky enthusiasts, I always wondered what a SHO station wagon would be like. That changed last year when I bought the aforementioned Sable LS wagon, festooned with the high-revving DOHC 3.0-liter V6 engine and five-speed manual transmission from a 1989 Taurus SHO. In addition, the wagon had SHO front seats, a SHO center console, and the 140-mph instrument cluster with mileage that matched the engine. When I bought it, that number was just under 60,000 – barely broken in for the overachieving Yamaha-sourced mill. The engine and transmission weren't the only upgrades. It wore dual-piston PBR brakes with the choice Eibach/Tokico suspension combo in front. The rear featured SHO disc brakes with MOOG cargo coils and Tokico shocks, resulting in a wagon that handled ridiculously well while still retaining a decent level of comfort and five-door functionality. I could attack the local switchbacks while rowing gears to a 7,000-rpm soundtrack just as easily as loading up on lumber at the hardware store. Over time I added a front tower brace to stiffen things a bit as well as a bigger, 73-mm mass airflow sensor for better breathing, and I sourced some inexpensive 2004 Taurus 16-inch five-spoke wheels, refinished in gunmetal to match the two-tone white/gunmetal finish on the car. That, along with some minor paint and body work, had me winning trophies at every car show in town. And yet, what I loved most about the car wasn't its looks or performance, but rather its history. And here's where things also get a little philosophical, because I absolutely, positively love old used cars. Don't get me wrong – new cars are great. Designers can sculpt a timeless automotive shape, and engineers can construct systems and subsystems to create an exquisite chassis with superb handling and plenty of horsepower. But it's the age and mileage that turn machines into something more than the sum of their parts.