2013 Fiat 500 Abarth on 2040-cars

Auto blog

Ram boss says not to expect midsize pickup in America

Remember that mysterious midsize four-door pickup FCA was spotted testing recently? It may be sold as a Fiat in markets overseas, but don't expect it to join the Ram lineup in North America. At least not according to the latest word from the truck brand's new boss. Speaking with Automotive News at the New York Auto Show, Ram CEO Bob Hegbloom outlined four criteria for a successful midsize pickup, particularly in the North American marketplace: they have less capability than a fullsize truck, but return with a more compact form, lower price and considerably higher fuel economy. "I've been able to develop a strategy to come up with three of the four," said Hegbloom, but "I haven't seen anyone who can deliver on all four." Smaller and less capable are easy, but getting both the price and the fuel consumption down at the same time is where it gets tricky. As it is, a Ram 1500 with the diesel engine and rear-wheel drive delivers 29 miles per gallon on the highway, which is already more than the 27-mpg rating on the midsize Chevy Colorado and GMC Canyon. But Hegbloom figures that in order to justify a midsize pickup, American buyers would expect at least 35 mpg on the highway, and in order to do so, FCA would have to employ some trick tech, which would in turn raise the price beyond an attractive level. The last time Chrysler offered a midsize truck in America was with the Dakota that was discontinued in 2011. Ford similarly ceased offering the Ranger in North America in 2012, leaving the new Colorado and Canyon to take on the Toyota Tacoma and Nissan Frontier in the compact/midsize pickup market in the US. With the prospect of a Ram version apparently off the table, then, Fiat's midsize four-door pickup is likely take on the likes of the Volkswagen Amarok, Mitsubishi Triton and Toyota Hilux in markets like Europe and South America. But like those trucks, it will likely never see the inside of an American showroom.

Fiat 500e recalled over possible half shaft separation

The recently launched, all-electric Fiat 500e is already facing its first recall. According to The Detroit News, more than 270 of the EVs are being recalled to replace bolts that secure the vehicles' half shafts. The official number of affected vehicles has not been announced as of this writing, as Chrysler will not inform the National Highway Traffic Safety Administration of this issue until it accounts for all problematic 500e models that are currently sitting on dealer lots.
Chrysler confirmed to the News that the problem is in no way related to the 500e's electric powertrain, simply the half shafts. The automaker launched an investigation into this problem after learning that a customer's vehicle experienced power loss. Engineers reportedly found that two assembly steps had not been completed, and that this could lead to half shaft separation.
No injuries or accidents related to this problem have been reported. Chrysler will contact owners of the affected 500e models, who will receive rental vehicles while their Fiats are being fixed. Of course, all repair work will be completed free of charge.

KSPG testing low-noise EV range extender engine

If you're going to add a gas-burning engine to an electric vehicle, it makes sense to have it be whisper quiet. We haven't heard the engine ourselves, but supplier KSPG AG said during the Detroit Auto Show this week that the range extender it put into a Fiat 500 for test purposes introduced "barely perceptible noise and vibration" levels. The engine, a two-cylinder V-type with something called "FEVcom vibration compensation" that allows the engine to kick on and power the vehicle without the cabin occupants really being able to notice. The whole unit - including a vertical crankshaft, two generators and gear wheel drive - comes in a ready-to-install support frame, KSPG says. Installed in the 500, it certainly looks tiny (click the image above to see what we mean). KSPG says the range extender is "largely universally mountable" and could be made cheaply if it were used in a variety of vehicles. KSPG worked with FEV on the project. Read more in the press release below. Low-noise range extender dispels battery runtime angst January 13, 2014 Together with FEV GmbH, KSPG is currently and successfully testing a range extender developed for electric vehicles. The test vehicle, based on the FIAT 500, has already undergone comprehensive tests at KSPG. Customer response to tests conducted at various OEMs underscore the targets achieved in the development of this extender where emphasis was on barely perceptible noise and vibration from the 2-cylinder V-type engine fitted with FEVcom vibration compensation. Thanks to its dedicated design features including active vibration compensation and convenient mounting location, the system on show performs excellently in the noise- vibration-harshness discipline. As a consequence, the impression of low-noise electric propulsion hardly suffers whenever the extender goes about its work. The range extender allows vast flexibility in the configuration of its operating strategy. Depending on the timing and load conditions for when it starts up, the unit's "operating philosophy" can be very closely adapted to any given conditions. The extender's advantages are to allow a reduction in battery size and cost and in the related weight. Also, the car can maintain its customary travel range without having to stop for lengthy recharging. It dispels "runtime angst," a phenomenon not to be underestimated when introducing electric mobility.