Srt Viper 6 Speed Manual Race Yellow on 2040-cars

Auto blog

Race Recap: Rolex 24 at Daytona was fast and feisty

Let the record show that victory at the 2015 Rolex 24 at Daytona went to the No. 02 Chip Ganassi Racing with Felix Sabates Target/Ford EcoBoost Riley DP driven by Verizon IndyCar drivers Scott Dixon and Tony Kanaan and NASCAR drivers Jamie McMurray and Kyle Larson. The winner did 740 laps to cover 2,634.3 miles in 24 hours and 57.667 seconds. That's a statement to this year's pace in spite of 18 cautions, two more than last year: the Michael Shank Racing Ligier got pole with a time of 1:39.194, slower than last year's pole time of 1:38.270; however, the winning car last year only did 695 laps. The fight for top honors was shaved to a four-car battle over the first third of the event. The No. 02 Ganassi car took the lead on the first lap, swapping it well into the night with the No. 01 Ganassi car, the No. 10 Wayne Taylor Racing Corvette DP, and the defending champion No. 5 Action Express Corvette DP, all of them staying within about 20 seconds of one another. The Action Express car had a fuel connector come loose and lost three laps getting towed back to the pits to have it reattached, but was back in the lead 18 hours in. The No. 01 Ganassi car dropped out with recurring clutch problems 22 hours in, retiring not long after. A race-within-the-race is where the concluding action happened, a seven minute, 30-second dash from the end of the last caution to the checkered flag. During the penultimate pit stops with an hour to go, Dixon was in second place followed Jordan Taylor in the Wayne Taylor Racing DP into the pits but beat him out, taking the lead. The Action Express car was in third. In the last pit stops of the race, Dixon gained even more time, getting a four-second advantage over Taylor. Then a full-course caution came out twenty minutes before the finish when a Prototype Challenge car hit the wall and caught fire, bunching up the field. That closed the pits, but the Wayne Taylor Racing car had to pit during that yellow because of a miscalculation of driver time. No driver can be behind the wheel for more than four hours in a six-hour period but Jordan Taylor was going to go over, so he came in to swap out for brother Ricky. That cost the team any chance of second place, since they took an additional drive-through penalty for entering closed pits. When the track went green again, Sebastien Bourdais in the Action Express car stayed all over Dixon for the final five laps but couldn't get around him.

Chrysler investigating complaints of vehicles with faulty power modules

Chrysler owners are hopping mad after experiencing a series of electrical gremlins in some of the company's vehicles. Issues range from mere annoyances - windows rolling down and radios turning off of their own accord - to serious safety issues, with headlights that randomly shut off at night and cars that stall and refuse to start.
The issues are being blamed on the total integrated power module, which can cost up to $1,000 for customers to replace. This, of course, has led to a hefty batch of complaints to the National Highway Traffic Safety Administration, with 240 owners expressing their displeasure so far. Another site, CarComplaints.com, has registered over 300 complaints relating to the 2010 to 2011 Jeep Grand Cherokee and Dodge Durango, alone, according to The New York Times.
Chrysler has acknowledged that it's investigating the complaints and is analyzing the faulty TIPMs, but that isn't quite enough for customers of the affected vehicles. The newspaper has snagged a few of the more harrowing tales with the electrically challenged Chrysler products, culled from the NHTSA complaints.

Dodge Viper now available in matte finish

The prospect of buying a new Dodge Viper just got that much more enticing with the introduction of matte-finish paint direct from the factory. Available as part of the "1 of 1" customization program, the matte finishes aren't being offered in just a handful of colors like some other automakers do: customers will be able to specify a matte finish on any of the 8,000 colors that are already part of the program's palette. The matte finish option adds yet another step to the exhaustive hand-painting process that Dodge offers on the Viper - a painstaking endeavor that takes upwards of 145 man hours to complete. Specialists start by applying a base coat and a clear finish, followed by the paint and clear coat. The finished body panels are then smoothed with 1,000-grit paper and polished. A second sanding process is required for the matte finish before the application of a matte clear coat. Specify custom stripes (available in five colors or by custom order) and they're applied under the paint, not as decals on top. The availability of the matte finish in conjunction with the stripe options and new satin badging and fuel cap leads to over 50 million combinations. Needless to say, that means no two Vipers need ever leave the Conner Avenue assembly plant the same – though there will surely always be certain favorite combinations, especially on those units ordered from outside the customization program. Related Video: DODGE EXPANDS INDUSTRY-FIRST '1 OF 1' VIPER CUSTOMIZATION PROGRAM WITH NEW MATTE-FINISH PAINT OPTION - New matte-finish exterior paint available on all of Viper '1 of 1' program's 8,000 exterior color options and 24,000 stripe options - Viper's custom '1 of 1' exterior paint options double to 16,000 exterior colors and 48,000 unique strip combinations - Matte finish available in all exclusive '1 of 1' program and standard production colors - In addition to matte-finish exterior paint, Viper customers can choose between satin chrome or satin black badging and fuel filler door for a sinister appearance - Dodge Viper owners can build their one-of-a-kind Viper from more than 50 million unique build configurations for the ultimate in model year exclusivity June 19, 2015 , Auburn Hills, Mich. - The Dodge brand continues to expand the Viper's exclusive production elements like never before.