2003 Dodge Viper Srt-10 Convertible 2-door 8.3l on 2040-cars

Auto blog

Rest of 2015.5 Dodge Viper lineup available after MSRP drop spurs sales uptick

The Dodge Viper has muscled its way back into buyers' good graces thanks to a $15,000 price drop across-the-board – and we're sure the extra five horsepower didn't hurt, either – posting a 26-percent year-to-date surge after the September realignment. No longer, uh, snakebitten, Dodge is now allowing dealers to place already-sold orders of the TA 2.0 Special Edition and GTS, both of which come with more goodies as standard than on the 2014 models they replace. The $101,995 TA wears a high performance Aero Package consisting of front lower dive planes, front splitter, competition rear spoiler, a dual-mode suspension supporting 18- or 19-inch matte black wheels on Pirelli PZero Corsa tires, two-piece Brembos rotors with black and orange calipers and performance pads, and a five-mode electronic stability control. We'll pretend to ignore features like a "rear carbon fiber applique" on a hardcore V10 sports car. The $107,995 GTS trim throws in Laguna leather seats as standard, an Alcantara headliner and an 18-speaker Harman Kardon system. It will also be the only model that can be had in Ceramic Blue with black stripes, orange brake calipers and GTS gloss black badging. And that rear carbon fiber applique, since it's apparently quite popular. The Connor Avenue plant where workers assemble the Viper by hand will begin production of the TA and GTS in November, the two models will appear in showrooms in Q1 of next year. A press release below has more information. Finally, it appears the only thing Connor Avenue builders looks like it finally has the work to keep everyone at work. {C} New 2015.5 Dodge Viper GTS and TA 2.0 Special Edition Models Now Available for Customer "Sold Orders" With New Pricing and More Content - Dodge Viper sales up 26 percent year-to-date since Dodge repositioned the hand-built exotic in September and reduced the starting price $15,000 - 2015 Dodge Viper's starting U.S. Manufacturer's Suggested Retail Price (MSRP) is $84,995 (all prices exclude gas guzzler tax and destination) - New 2015.5 Viper GTS and TA 2.0 models now available for sold customer orders - Track-ready Viper TA 2.0 Special Edition builds on success of TA model; U.S. MSRP starts at $101,995 and adds high-performance Aero Package, competition rear spoiler and front lower dive planes for increased downforce and improved handling on the track - U.S.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Small number of 2013 Chrysler 200 and Dodge Avenger models recalled

A small number of units of the 2013 Chrysler 200 (inset) and 2013 Dodge Avenger are being recalled over a broken control valve in the fuel tank assembly. The potential 1,785 sedans were manufactured late last year, and if affected with a broken control valve could suffer from stalling or fuel leakage.
A bulletin from the National Highway Traffic Safety Administration notes that the recall should begin next month, at which time owners can take their cars to dealers for repair free of charge. The full release with more information is just below.