1993 Dodge Stealth Es Hatchback 2-door 3.0l Not Running Being Sold ''as Is" on 2040-cars

Auto blog

Race Recap: Rolex 24 at Daytona was fast and feisty

Let the record show that victory at the 2015 Rolex 24 at Daytona went to the No. 02 Chip Ganassi Racing with Felix Sabates Target/Ford EcoBoost Riley DP driven by Verizon IndyCar drivers Scott Dixon and Tony Kanaan and NASCAR drivers Jamie McMurray and Kyle Larson. The winner did 740 laps to cover 2,634.3 miles in 24 hours and 57.667 seconds. That's a statement to this year's pace in spite of 18 cautions, two more than last year: the Michael Shank Racing Ligier got pole with a time of 1:39.194, slower than last year's pole time of 1:38.270; however, the winning car last year only did 695 laps. The fight for top honors was shaved to a four-car battle over the first third of the event. The No. 02 Ganassi car took the lead on the first lap, swapping it well into the night with the No. 01 Ganassi car, the No. 10 Wayne Taylor Racing Corvette DP, and the defending champion No. 5 Action Express Corvette DP, all of them staying within about 20 seconds of one another. The Action Express car had a fuel connector come loose and lost three laps getting towed back to the pits to have it reattached, but was back in the lead 18 hours in. The No. 01 Ganassi car dropped out with recurring clutch problems 22 hours in, retiring not long after. A race-within-the-race is where the concluding action happened, a seven minute, 30-second dash from the end of the last caution to the checkered flag. During the penultimate pit stops with an hour to go, Dixon was in second place followed Jordan Taylor in the Wayne Taylor Racing DP into the pits but beat him out, taking the lead. The Action Express car was in third. In the last pit stops of the race, Dixon gained even more time, getting a four-second advantage over Taylor. Then a full-course caution came out twenty minutes before the finish when a Prototype Challenge car hit the wall and caught fire, bunching up the field. That closed the pits, but the Wayne Taylor Racing car had to pit during that yellow because of a miscalculation of driver time. No driver can be behind the wheel for more than four hours in a six-hour period but Jordan Taylor was going to go over, so he came in to swap out for brother Ricky. That cost the team any chance of second place, since they took an additional drive-through penalty for entering closed pits. When the track went green again, Sebastien Bourdais in the Action Express car stayed all over Dixon for the final five laps but couldn't get around him.

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.

Dodge Challenger Shakedown: '71 body, new guts

While Jeep has created a number of vintage-bodied custom vehicles with modern components, this year's SEMA show plays host to Dodge's take on the idea. The Shakedown concept began life as a 1971 Challenger and ditched almost everything in it, including the engine and chassis. What's left is a modern car with a retro look. The chassis was a particularly complicated part of the job, since the Challenger was originally a unibody car. However, Dodge chose to separate the Challenger's iconic body from its structural parts, and moved it onto a custom, one-off chassis from which the body can be removed as needed. The chassis also carries lowered suspension, Challenger Hellcat brakes, and a 6.4-liter 392 Hemi V8 connected to a six-speed manual transmission from the Viper. Dodge also installed the engine using the new Hemi engine swap kit from Mopar. With the shaker cold-air intake and custom exhaust, the Shakedown's powerplant makes 485 horsepower. View 13 Photos The body itself received plenty of tweaking as well. Dodge shaved off the drip rails, door handles, and turn signals for a cleaner look, and also fitted the grille, headlights, and taillights from a 2017 Challenger. The whole thing is finished in matte black paint with a "vibrating" stripe offset on the left side. The Shakedown also gets 20-inch Slingshot rear wheels and a pair of custom 19-inch versions for the front. On each fender is a bright red "392" decal that uses the same font as the labels on classic Mopars 360 cubic-inch V8s. Inside, the Shakedown gets the same radical upgrade as the chassis. Two Viper seats accompany a Viper steering wheel, and the rear seats are gone altogether. The Viper gearbox is shifted with a Challenger Hellcat gear knob, and carbon-fiber accents and leather adorn the wheel, door panels, instrument panel and center console. Related Video: Image Credit: FCA, Joel Stocksdale SEMA Show Dodge Coupe Concept Cars Performance