2002 Dodge 3500 Wheelchair Van 10 Passenger High Top 6'4" Clearance Runs New!! on 2040-cars

Auto blog

MotorWeek revisits the awesome, original Dodge Viper

MotorWeek is bringing the automotive world a wonderful blast from the past with its latest Retro Review. Not only does the video feature the now-famous, original Dodge Viper, but this is also a chance to watch one lapping Pocono International Raceway in a test of track prowess. This segment was MotorWeek's first chance to unleash the Viper around a racecourse, and the show took advantage of the opportunity. In addition to the usual 0-60 mph and quarter-mile tests, the 400-horsepower V10 is let loose to do lap after lap. The clip offers a great dose of nostalgia and is worth a watch to remember the intense enthusiasm surrounding the Viper at the time.

Mopar '13 Dart will roll into Chicago next week

We think this officially counts as a tradition. Every year going back to 2010, Mopar has rolled out a limited edition version of a popular product from the Chrysler Group portfolio. First it was the Mopar '10 Challenger, then the Mopar '11 Charger, then last year's Mopar '12 300, and this year it will be the Mopar '13 Dart, which will make its official world debut next week at the 2013 Chicago Auto Show.
Limited in number to just 500 units, the Mopar '13 Dart is no mere appearance package, though the demeanor of the Dart will be murdered out with a gloss black finish, gloss black 18-inch wheels, a set of Mopar blue stripes and a mean-looking Mopar ground effects kit. Likewise, the interior is touched up with leather seats (a blue one for the driver and black hides for the passengers), gloss black and black chrome trim, blue accent stitching, a sport pedal kit and other Mopar interior accessories.
Turning our attention back to the mechanical bits, the Mopar '13 Dart comes with the car's most powerful engine, a turbocharged 1.4-liter MultiAir four (shared with Fiat 500 Abarth) that's paired with a manual transmission. Those big, black wheels get wrapped in low profile 225/40R18 performance tires, and keeping everything in check is an upgraded brake kit with slotted rotors. The steering has also been calibrated for performance, the suspension lowered seven millimeters, and the exhaust tuned for better engine breathing.

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.