Lifted Dodge Ram 2500 **diesel** 5.9l 4x4 *manual* 6sp Ext Cab on 2040-cars

Auto blog

FCA is setting a five-year strategy: Here's how the last one played out

We're slightly more than four years removed from Sergio Marchionne last five-year plan for FCA, a tell-all where the Italian-American automaker divulged its plans for the 2014 through 2018 model years. It was a grand affair, where Sergio told FCA investors that all was right in Auburn Hills, Alfa Romeo and Maserati were making comebacks, and the fifth-gen Dodge Viper received a mid-cycle refresh. You can read every last one of those past predictions right here. We're on our way to Europe to see Sergio's sequel, coming out Friday straight from FCA's Italian headquarters. (Bloomberg reports a plan to expand Jeep and Ram globally, combine Alfa Romeo and Maserati into a single division for an eventual spinoff, and downsizing Fiat and Chrysler. Also, EVs.) But before we arrive in Italy and find out exactly what Marchionne has planned for 2019 through 2023 as his last act as CEO, let's take a minute to tally up the results of his last term based on the same scoresheet we used in 2014. Now, we're only five months into 2018, so much of this — including vehicles like the Ram HD and Jeep Grand Wagoneer — could still debut this year. For those, we'll mark things TBD. We're not going to draw any conclusions or make any objectionable remarks. We're simply going to let the stats speak for themselves.

Mopar Hellephant is sold out, but here are 4 other awesome crate V8s to try

Despite a relatively enormous $30,000 price tag, Mopar's 1,000-horsepower supercharged Hellephant crate engine sold out in just 48 hours. Some enthusiasts may have missed out on the crazy engine due to lack of funds, or they just assumed there would still be some Hellephants down the line. But worry not, swap-happy gearheads. There are plenty of V8s in the world to pick from, and we highlighted four favorites. They're not as powerful, but they're all cheaper, and still have a lot to offer. Mopar 6.2L Hellcrate Odds are a lot of prospective Hellephant buyers were Mopar fans to begin with, so we'll start the list with the next-most-potent offering: the Hellcrate. This is the same supercharged 6.2-liter V8 found under the hood of the Dodge Charger and Challenger Hellcats and the Grand Cherokee Trackhawk. It makes 707 horsepower and 650 pound-feet of torque like those cars, too. It's also about $10,000 cheaper than the Hellephant engine at $20,020, and that leftover money can be used to finish the project or for aftermarket upgrades to get it closer to the Hellephant's output. GM LS9 6.2L The Hellcrate isn't the only factory supercharged crate engine on the market. From General Motors comes the supercharged 6.2-liter LS9 V8. This is the engine that was used in the C6 Corvette ZR1. At 638 horsepower and 604 pound-feet of torque, it doesn't make as much power or torque as the Hellcrate. But it does boast a dry sump oil system. So instead of pumping oil out of a pan at the bottom, the engine uses an oil tank mounted remotely that pumps oil into the engine. This means the engine is shorter overall, and can be mounted lower for a better center of gravity. It also means that there's almost no risk of running the engine dry in hard cornering, as could happen with a normal oil sump where the oil can slosh to the side without the oil pump. Basically, it offers some major benefits if you want supercharged V8 power for a road course car. It's also a tad cheaper than the Hellcrate at $18,149. But get one while you can, because GM is only selling what's left from when it was building the C6 ZR1. Ford Aluminator 5.2XS Our pick from the Blue Oval lacks a supercharger, but it's still pretty sweet.

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.