Dodge Ram Mega Cab Laramie 4x4 Cummins Diesel Custom Lift Wheels Tires Loaded on 2040-cars

Auto blog

Dodge recalls 27k Darts for bracket that can disrupt transmission module

Dodge is recalling 27,520 examples of the 2013-2015 Dart with dual-clutch gearboxes. The mounting bracket for the transmission control module can affect the part's operation and cause the compacts to suddenly shift into neutral. According to the automaker, 23,688 of them are in the US, 3,376 in Canada, 5 in Mexico, and 451 elsewhere. The National Highway Traffic Safety Administration reports these examples carry build dates between February 24, 2012, and June 16, 2015. There are also no reports of accidents or injuries. Because of the way the bracket is mounted, the part can put too much force on the control module's circuit board and cause it to shift out of gear. The engine and airbags remain operable if this happens. To fix things, dealers will install a redesigned mount and replacement module. Related Video: Statement: Mounting Bracket September 14, 2015 , Auburn Hills, Mich. - FCA US LLC is recalling an estimated 23,688 cars in the U.S. to replace certain control modules and mounting brackets that may contribute to a loss of motive power. The Company is unaware of any related injuries or accidents. An FCA US investigation prompted by a small number of warranty claims discovered a control-module mounting bracket may apply too much force and disrupt the function of a circuit board within the module. This condition, unique to certain cars equipped with dual dry-clutch transmissions (DDCT), may cause the transmission to shift into neutral. However, the engine remains on and the vehicle's air-bags, as well as other safety features, are unaffected. The condition may also be preceded by the illumination of a dashboard warning light. Customers who observe this are urged to contact their dealers. The campaign is limited to certain 2013-2015 Dodge Darts equipped with DDCTs. Additional vehicles will be recalled in Canada (3,376), Mexico (five) and outside the NAFTA region (451). Affected customers will be advised when they may schedule service, which will be performed free of charge. Service will entail installation of a redesigned mounting bracket and replacement of the control module. Customers with additional questions may call the FCA US Customer Information Center at 1-800-853-1403.

Auto sales in March and first quarter down nearly across the board

Nearly every major automaker reported weak U.S. sales for March and the first quarter of 2019, citing a rough start to the year, but said a robust economy and strong labor market should encourage consumers to buy more vehicles as 2019 rolls on. GM, which no longer releases monthly sales figures, saw first-quarter sales fall 7 percent, with declines across all brands. Sales of Silverado pickup trucks fell nearly 16 percent and the high-margin Chevy Suburban large SUV dropped 25 percent. Ford also no longer releases monthly sales numbers, but is due to release its first-quarter sales figures on Thursday. According to industry data, Ford's sales fell 2 percent in the quarter and 5 percent in March. Ford representatives did not immediately respond to requests for comment. FCA reported a 7 percent fall in U.S. sales in March and a 3 percent drop for the first quarter. All of FCA's brands dropped in March, except for Ram, which saw a 15 percent increase in pickup truck sales. "The industry had a tough first quarter, but with spring finally starting to show its face and continued strong economic indicators ... we are confident that new vehicle sales demand will strengthen going forward," FCA's U.S. head of sales, Reid Bigland, said in a statement. Toyota reported a 3.5 percent fall in U.S. sales in March and 5 percent for the first quarter, hurt by declining demand for its Corolla sedans and Camry vehicles. "While some of our competitors are abandoning sedans, we remain optimistic about the future of the segment," Toyota said in a statement. Nissan posted a 5.3 percent drop in sales in March, and its first-quarter sales were down 11.6 percent. Honda and Hyundai bucked the trend. Honda's U.S. sales rose 4.3 percent in March and 2 percent in the quarter, while Hyundai's were up 1.7 percent and 2.1 percent, respectively. Passenger-car sales suffered throughout the January-March quarter compared with the same period in 2018 as Americans continued to abandon them in favor of larger, more comfortable pickup trucks and SUVs, which are far more profitable for automakers. The battle for market share in the particularly lucrative large-pickup truck market intensified in the quarter, as Fiat Chrysler Automobiles' Ram brand outsold the U.S.' No. 1 automaker General Motors' Chevrolet-brand trucks. The two automakers have both launched redesigned pickup trucks.

FCA inline-six rumored to be real, headed for Jeep Wagoneer

In September, Allpar reported that that clues being dropped at Fiat- Chrysler headquarters, in the carmaker's factories, and on engineer resumes pointed to the development of an inline six-cylinder engine. The site has just proclaimed the rumor is reality, writing that the straight-six, "turbocharged to meet or beat 5.7 Hemi power ratings, with a smoother torque curve, is on the way." The motor's first outing is expected to be either the next-generation Jeep Grand Cherokee, debuting perhaps next year, or the Jeep Wagoneer, debuting in 2020 or 2021. "Tornado" is the purported codename for the power plant said to be just under three liters in displacement, expanding the family begun with the Global Medium Engine 2.0-liter turbo codenamed Hurricane. Engine bay constraints and a long use horizon mean engineers won't simply add two more cylinders to the GME, however. Allpar says the brief is to keep the Tornado GME-T6 — the alphanumeric for "turbocharged six" — no more than three inches longer than the Tigershark 2.4-liter four-cylinder. That means "major design changes" that could include a space-saving head, more closely spaced cylinders, and no cylinder liners. An FCA division called Comau could be called on for its "SmartSpray" plasma lining technology. Allpar muses that the standard version of the engine for Chrysler, Dodge, Jeep, and Ram could get a single twin-scroll turbocharger. Performance trims for Alfa Romeo and Maserati could get different heads and maybe twin turbos, an SRT version might also get both those tweaks. History shows that the Italian versions would make changes to the block, as well. Even so, the Tornado would be less expensive than any Ferrari-supplied V6. A straight-six would put FCA in company with current adopters BMW and Mercedes-Benz, future users like Jaguar, and perhaps Aston Martin. The engine would span the widest range of use cases in the U.S. carmaker's portfolio, though. Potential applications include being a base engine for Ram trucks, serving double duty as a base engine and 5.7-liter Hemi replacement for the Dodge Charger and Challenger, working in the high-end Jeeps, and as a properly hot trim — with Ferrari-designed heads — in the luxury Italian sports cars. The Alfa Romeo Giulia begs for just such motivation to fill the gap between the 280-hp, $42,695 Ti Sport RWD and the 505-hp, $73,700 Giulia Quadrifoglio RWD. And a twin-turbo inline-six in a Maserati Alfieri would stack up nicely with the Germans.