Dodge Ram Mega Cab 5.9 Cummins Diesel Slt 4x4 Custom Lift Wheels Tires on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Ram, Jeep redesigns on hold, Alfa Romeo models may come sooner

Last summer, FCA outlined an ambitious five-year plan that sketched out the company's product intentions for each of its brands through the end of 2018. However, even the best strategies sometimes need tweaking. According to Reuters after speaking with unnamed people at auto suppliers, FCA is now possibly delaying at least a dozen projects in North America for a variety of reasons. From vehicle to vehicle, these postponements allegedly last anywhere from just a few months to over a year. The sources from the suppliers claim that in some cases these tweaks are for engineering and design changes. The next-gen Ram 1500 reportedly has among the shorter delays and is being pushed from mid-2017 to November 2017, according to Reuters. Also, the much-discussed future Jeep Wrangler is allegedly moving a little later to July 2017. Among the vehicles purportedly seeing longer delays, the next-gen Grand Cherokee could get pushed back about a year to 2018. That then forces the launch of the three-row, luxury Grand Wagoneer to be even further away. Jeep's upcoming C-segment CUV and the all-new Chrysler 300, Dodge Charger, and Challenger might also see postponements. The one brand allegedly seeing an accelerated plan is Alfa Romeo. Without going into detail, the sources from these suppliers claim that the Italian automaker is getting even more vehicles for its lineup and could get them even faster than planned. "Those plans need to be flexible and fluid, with the potential to add some vehicles, pull some forward and extend the life cycle of others," FCA said to Reuters about all of these allegations. "We look at these programs on a vehicle-by-vehicle basis." Investment in the auto industry has been a major topic for FCA CEO Sergio Marchionne as of late. He believes consolidation is necessary so that companies aren't burning money on the same projects. Related Video: News Source: ReutersImage Credit: Bill Pugliano / Getty Images Plants/Manufacturing Alfa Romeo Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA fca us

Dodge Viper ACR reportedly green lit [w/video]

The Dodge Viper might be getting a little more venomous in the near future thanks to a return of the performance-honed ACR trim. According to an anonymous source leaking the info to Allpar, the version would go into production in July as a 2016 model year vehicle. FCA US showed a concept for a future ACR (pictured above) at the 2014 SEMA Show that sported carbon fiber parts for the front splitter and dive planes, plus a picnic-table-sized rear wing. The body also received ducts at the rear to shoot cool air to the differential. A set of 15.4-inch carbon-ceramic brake rotors also brought things to a halt in a hurry. The company promised all the aero pieces were sculpted in the wind tunnel to give the coupe even more downforce. To shed weight, engineers chucked the radio, speakers, carpet and sound deadening out of the interior, and they replaced many bits with even more carbon fiber. All of the tweaks are necessary because the ACR moniker carries serious cachet for the Viper at the track, especially at the Nurburgring. One reportedly did a 7:22 lap around the 'Ring in 2008, and another improved that further to 7:12 in 2011. Autoblog reached out to FCA US for comment about the possibility for the hotter Viper, but the company wasn't willing to comment about any possible, future projects. Related Video: