2018 Ram 2500 on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Autoblog's guilty pleasure cars

Guilty pleasures are part of life – don't even try to pretend like you don't have one (or two, or six). In the non-automotive space, this could come down to that secret playlist in your iPhone of songs you'll only listen to when you're alone; or think of that one TV show you really do love, but won't admit to your friends. I've got plenty, and so do you. Going back to cars, here's a particularly juicy one for me: several years ago, I had a mad crush on the very last iteration of the Cadillac DTS. Oh yes, the front-wheel-drive, Northstar V8-powered sofa-on-wheels that was the last remaining shred of the elderly-swooning days of Cadillac's past. Every time I had the chance to drive one, I was secretly giddy. Don't hate me, okay? These days, the DTS is gone, but I've still got a mess of other cars that hold a special place in my heart. And in the spirit of camaraderie, I've asked my other Autoblog editors to tell me some of their guilty pleasure cars, as well – Seyth Miersma, as you can see above, has a few choice emotions to share about the Mitsubishi Lancer Evolution. Read on to find out what cars make us secretly happy. Mercedes-Benz SL65 AMG This decadent convertible is the epitome of the guilty pleasure. It's big, powerful, fairly heavy and it's richly appointed inside and out. It's a chocolate eclair with the three-pointed star on the hood. Given my druthers, I'd take the SL65 AMG, which delivers 621 horsepower and 738 pound-feet of torque. That output is borderline absurd for this laid-back convertible. I don't care. You don't need dessert. Sometimes you just crave it. The SL line is about the feel you get on the road. The roof is open. The air, sun and engine sounds all embrace you. It's the same dynamic you could have experienced in a Mercedes a century ago, yet the SL gives you the most modern of luxuries. An Airscarf feature that warms my neck and shoulders through a vent embedded in the seat? Yes, please. Sure, it's an old-guy car. Mr. Burns and Lord Grantham are probably too young and hip for an SL65. I don't care. This is my guilty pleasure. Release the hounds. – Greg Migliore Senior Editor Ford Flex I drove my first Flex in 2009 when my mother let me borrow hers for the summer while I was away at college. The incredibly spacious interior made moving twice that summer a breeze, and the 200-mile trips up north were quite comfortable.

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.