2001 Dodge Ram 2500 Turbo Cummings Diesel 4x4 Auto With V-plow on 2040-cars

Auto blog

2015 Dodge Challenger SRT Hellcat gets brace of new videos

Yesterday's big announcement focusing on the new Dodge Challenger SRT Hellcat had plenty of stuff going for it - information, pictures and the rabid enthusiasm that always accompanies such an eagerly anticipated reveal. What it was lacking, though, was a proliferation of videos of the new model.
Sure, yesterday's news came with one clip, but today, Dodge has come through with five videos. We've arranged them in what we think will be the most entertaining order, covering the powertrain, before moving on to exterior and interior design, then on to a full CGI dissection of the SRT Hellcat before capping things off with a piece on the non-supercharged Challenger SRT392.
Take a look below for all five videos, then head into Comments and let us know what you think.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Marchionne on Alfa's US return, Dodge Dart's powertrain weakness and minivan plans

As a reporter covering an auto show, the one opportunity you never want to miss is going to the Sergio Marchionne press briefing.
"This undertaking to bring Alfa back is a one-shot deal... We are not going to do this twice."
There just aren't that many real characters left in the auto industry. Marchionne, who sits atop both Chrysler and Fiat, is not only one of the smartest execs in the business, but also the most frank. Herein, a sample of the quotable always-sweatered executive: