1999 Dodge Ram 2500 Cummins 24 Valve Turbo Diesel Auto Low Miles on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Stellantis wants to trim 3,500 hourly U.S. jobs, UAW says

WASHINGTON — Chrysler-parent Stellantis NV wants to cut approximately 3,500 hourly U.S. jobs and is offering voluntary exit packages, according to a United Auto Workers union letter made public Tuesday. The automaker is looking to reduce its hourly workforce offering incentive packages that include $50,000 payments for workers hired before 2007, UAW Local 1264 said in a letter dated Monday posted on its Facebook page. Stellantis spokeswoman Jodi Tinson declined to comment. A person briefed on the matter said the figure might be lower than the figure cited in the UAW letter. In late February, Stellantis indefinitely halted operations at an assembly plant in Illinois, citing rising costs of electric vehicle production. The action impacted about 1,350 workers at the Belvidere, Illinois, plant that built the Jeep Cherokee SUV and resulted in indefinite layoffs. The automaker has warned it may not resume operations as it considers other options. The UAW letter said openings created by workers leaving would be filled by workers on indefinite layoff. Stellantis said in February that about 40,000 U.S. hourly workers were eligible for profit sharing. Last week, UAW President Shawn Fain said Stellantis' decision to idle the Illinois plant was "a flat-out violation" of the union's contract with the UAW and is unacceptable. The UAW will enter talks with the Detroit Three before labor contracts expire in mid-September. Earlier this month, General Motors said about 5,000 salaried workers accepted buyouts to leave the automaker. GM CEO Mary Barra said February job cuts of a few hundred jobs and the 5,000 buyouts "provided approximately $1 billion towards" a $2 billion cost cutting target. Ford Motor Co recently announced significant job cuts in Spain, Germany and other parts of Europe and in August said it would cut a total of 3,000 salaried and contract jobs, mostly in North America and India. Hirings/Firings/Layoffs UAW/Unions Chrysler Dodge Fiat Jeep Maserati RAM Stellantis

Rare Dodge Shelby Dakota is a very '80s sport truck

The late-great Carroll Shelby built an incredibly successful career of making all sorts of cars faster, more often than not, with a bigger or more potent engine under the hood. The icons are well known—legends like the Shelby Cobra, GT350 Mustang, and the big GT500. But by the 1980s, Shelby was plying his trade over at Chrysler, at the behest of chairman Lee Iacocca, churning out special editions like the Dodge Shelby Charger, zippy CSX, rorty GLHS, and this—the 1989 Shelby Dakota muscle truck. 1,500 of these racy pickups were built for just one year and a whole two-and-a-half decades later they still turn heads. This one especially. The spotless pickup recently turned up for sale online , and its odometer reads a claimed 25,307 miles. So what makes these rarified work trucks special? As with most Shelbys, it starts under the hood. Up until 1989, the standard Dodge Dakota pickups were offered in only four-cylinder and V6 variants. But Dodge (and Shelby) wanted more, so the larger 5.2-liter Magnum V8 from Dodge's full-size pickup was shoehorned into the midsize Dakota, albeit not effortlessly. To fit, Dodge had to swap the V8's belt-driven fan for an electric unit mounted in front of the radiator. That did the trick, as well as earned the V8 a few extra ponies, pushing the special Dakota up to 175 horsepower and 270 lb.-ft. of torque. That performance may sound paltry by today's standards, but in 1989 it was seen as quite sporty, and netted a zero to 60 mph dash in 8.5 seconds. A four-speed automatic with lockup torque converter transmitted that power to the rear wheels. Additional Shelby performance goodies included a limited-slip differential, transmission cooler, along with a host of eye-catching body mods, including a unique air dam and bumpers, Shelby floor mats, monogramed seats and door panels, a "CS" steering wheel, 15-spoke hollow alloy wheels, and shouty body graphics. While the Shelby Dakota didn't return for 1990, its V8 legacy did continue, and in 1991 the 5.2-liter eight-cylinder became an option on new Dakotas. Of the 1,500 Shelby Dakota pickups built, 860 were dressed in red while a rarer 640 came adorned in Bright White. This '89 is said to be #245 of those white trucks, sold new to its original (and sole) owner in Mechanicsburg, Pennsylvania, for $15,985 (the Shelby package cost $3,933 in its day). Currently, it's demanding bids north of $10,000 for its low-mileage originality. Related Video: This content is hosted by a third party.