Wow! (( 4x4..4dr/ Quad Cab...5.9l V8...cap...loaded ))no Reserve on 2040-cars

Auto blog

Dodge reveals a few of the goodies in the Demon crate

One of the teaser trailers for the eagerly anticipated Dodge Challenger Demon featured a big crate full of goodies for the car. As with the car, though, Dodge was a bit coy about what was inside, simply saying there were 18 items, consisting of tools and parts. Now we know what tools the car gets, and they're some very nice Snap-On pieces. All of the tools and accessories are branded with the Demon logo. And the tools included should be perfect for easy tire changes at the track. Specifically, the tools include a hydraulic jack, cordless impact wrench with charger, torque wrench, and a tire pressure gauge. There's also a fender cover to protect the paint when working under the hood, and a nice carrying bag with the Demon emblem on the side. And, naturally, all of the tools are limited-edition units made specifically to accompany the Demon. If you want to do anything more involved than wheel swaps, you'll need to supply a few tools of your own. But this should be good for the weekend drag racer or autocross driver who wants to drive down to the course on street tires, then throw on the sticky rubber at the track. Also, as you may have noted, these tools only constitute six items in Dodge's count, leaving 12 others that must be car parts. We know that among the parts are some factory Demon wheels, and items that Dodge describes as "Direct Connection Performance Parts" and the "Demon Track Pack System." Details on these remain scarce, but they will probably be revealed closer to the car's debut date of April 11. Related Video:

2015 Dodge Charger R/T Scat Pack Quick Spin

"Scat Pack" is plucked from The Big Book of Dodge Nameplates to describe what is basically the average of the Charger R/T and Charger SRT 392. Unnecessary horsepower always seems to go down better with a dose of heritage. If you think it's a silly name, just be thankful Dodge didn't call it an S/RT or an R/T-S. In previous years, a similar formulation was known as the SRT8 Super Bee. Going by another name, it's still as sweet and wears the same hurried-looking pollinator on the grille. We do wonder: What has displeased him so, and why does he have wings and wheels? The packaging is at least fresh. All Chargers get updates for 2015, including improved interiors and a Dart-on-steroids exterior redo. The new lines work especially well on the more aggressive models, including this Scat Pack car. Like the Super Bee before it, the Scat Pack gets the 6.4-liter engine from SRT 392; for 2015 it gets a slight output boost to 485 horsepower and 475 pound-feet of torque, respective increases of 15 and 5. It does without the SRT three-mode suspension and comes with cloth seats (leather is an option) to keep the price down. The Scat Pack also has slightly smaller Brembo front brakes, narrower wheels, and different rubber. It does, however, cost eight grand less and is just as quick in a straight line. Intriguing. Driving Notes Scat Pack cars get an electronically controlled active exhaust that we'd call hyperactive. It's loud all the time, opening its widest at startup, idle, and when you ask for any appreciable amount of power. Sport mode supposedly makes a difference, but we couldn't discern loud from louder. It's a delicious and appropriate loudness, with a brassy trumpet tone to it, and the engine makes top-fuel noises at full tilt. The squeal of the rear tires can be heard from every stoplight no matter the road conditions. A light touch avoids leaving a mark if you're so inclined. We weren't. When the tires eventually smear into the realm of traction, this thing is pretty quick – hitting 60 miles per hour takes 4.5 seconds. There's also an adjustable launch control mode if you want to cut out some of the wheelspin. The eight-speed transmission shifts smoothly. Quicker, more-palpable shifts are had in Sport mode, but occasionally the transmission still needs a moment to drop down from seventh or eighth when you mash the throttle. Despite its two overdrive gears, this Charger is still loud on the highway. In a good way. Probably.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat