We Finance Manual Blue Clean Pre-owned Smoke Free Bed Clean Excellent Condition on 2040-cars

Auto blog

Dodge celebrates centennial with Charger and Challenger 100th Anniversary Editions

In 1914, the Dodge brothers went from being a parts supplier to a full-scale automaker, and to celebrate the centennial of this milestone, Dodge will offer special editions of the 2014 Charger and Challenger early next year. Both cars will be sold in limited numbers (although no specific number was given), and these cars will stand out thanks to unique touches like 20-inch wheels, 100th anniversary edition logos and the exclusive High Octane Red Pearl Coat paint job (shown above).
The 100th Anniversary Edition package, which runs $2,200 on the 2014 Charger and $2,500 on the 2014 Challenger, comes with red or black leather seats with a cloud print (for a denim-like look) and metal badges on the seatbacks that read "Dodge Est. 1914," while similar logos are also found on the wheel center caps and front fenders. The instrument gauges are unique to each car, with the Charger getting black gauges and the Challenger getting white gauges, and to enunciate the 100-year anniversary, both cars have red numerals on the speedometer for the 100-mile-per-hour mark.
Finishing off the 100th Anniversary Edition cars, which will be offered on V6 and R/T models, Dodge adds a flat-bottom steering wheel and embroidered floor mats as a part of the package. Scroll down for the full press release for these commemorative models.

The final-year Viper special editions sold out so fast Dodge is adding more

Viper collectors don't mess around. After Dodge opened ordering for its 25th anniversary 2017 Viper models – some of the last ones that will be built – all of the cars were spoken for in just five days. The company managed to sell 206 cars, an average of about 41 per day. Compare that to the 241 Vipers sold through May of this year and you can see why special editions make good business sense. Demand was so strong that Dodge will add a sixth special-edition for the Viper's last year of production. Within the group of five initial special packages, the winner was the 1:28 Edition ACR; all 28 went in 40 minutes. Dodge sold the 31 VooDoo II Edition ACRs in two hours, while 25 Snakeskin Edition GTCs and 100 GTS-R Commemorative Edition ACRs took two days to sell out. The 22 Dodge Dealer Edition ACRs took five days – apparently the dealers were too busy taking orders for the other 184 cars they didn't have time to order their own. The additional anniversary car is called the Snakeskin ACR. Dodge will build "up to" 31 of them, which we're pretty sure means exactly 31 if the previous demand is any indicator. The count matches the 2010 run of Snakeskin ACRs and will take the final-edition total to 237. We don't have any photos of that one yet, but you can get a good idea of what it will look like from the Snakeskin GTC. This one features Snakeskin Green paint, obviously, with a custom snakeskin-patterned SRT stripe, the ACR Package, the Extreme Aero Package, carbon-ceramic brakes, the ACR interior, a serialized Snakeskin badge on the instrument panel, and a custom car cover with the owner's name by the door. It will be available to order in the middle of this month, which means it will be sold out well by the end of the month. Chances are these and many of the others will go to mega-collectors like Wayne and D'Ann Rauh of Texas, who, at last count, owned 79 Vipers. Seventy-nine. Like we said, Viper collectors don't mess around. Related Video:

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat