Ultimate Ram Crew Cab W/every Option! Rambox, Rear Tv, Moonroof, Navigation, Etc on 2040-cars

Auto blog

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.

FCA updates 700k-vehicle recall to replace ignition switches

FCA US is revising a previously announced recall of 702,578 minivans and SUVs; now specifying that owners replace their ignition switches, rather than just a component. The campaign affects the 2008-2010 Chrysler Town & Country, 2008-2010 Dodge Grand Caravan and 2009-2010 Dodge Journey. The National Highway Traffic Safety Administration initially opened an investigation last summer following complaints about the ignition switches in these models. FCA US (then Chrysler Group) responded with a recall of 695,957 examples of these vehicles because the key could appear to be in the "Run" position but not be fully engaged. If it slipped out, and there was an accident, then the airbags might not deploy. The company had initially planned to install a new detent ring to fix the problem. According to the timeline in a NHTSA document (available here as a PDF), the government agency and FCA US continued their research into the problem. The automaker found that the time needed to create a new ring design and updated software would be longer than replacing the whole ignition switch. The company worked with the supplier Marquardt to negotiate an accelerated schedule to manufacture the extra replacement parts. According to NHTSA, the investigation has now been closed because of FCA's recall. Company spokesperson Eric Mayne confirms to Autoblog via email, "No additional vehicles are affected and all affected customers have already been made aware their vehicles are subject to recall." FCA US sent out an initial notification advising owners of the problem in September 2014. The company will now send out a second letter in April and will replace the parts in two phases. Repairs for affected models from the 2008 and 2009 model years will begin in April, and 2010 examples will start being fixed in August. RECALL Subject : Ignition Switch may Turn Off , 1 INVESTIGATION(S) Report Receipt Date: JUN 26, 2014 NHTSA Campaign Number: 14V373000 Component(s): AIR BAGS , ELECTRICAL SYSTEM Potential Number of Units Affected: 702,578 All Products Associated with this Recall Vehicle Make Model Model Year(s) CHRYSLER TOWN AND COUNTRY 2008-2010 DODGE GRAND CARAVAN 2008-2010 DODGE JOURNEY 2009-2010 Details Manufacturer: Chrysler Group LLC SUMMARY: This defect can affect the safe operation of the airbag system. Until this recall is performed, customers should remove all items from their key rings, leaving only the ignition key.

Dodge Challenger ADR prototypes spied with massive rubber

In an effort to give the Dodge Challenger one last hurrah before making the switch to the Giorgio platform in 2018, Automotive News reports that the automaker will come out with the Challenger ADR. The ADR, which stands for American Drag Racer, is expected to be a wide-body, Hellcat-powered variant that is closely based off of the current model. The report seems to have merit, as photographers have captured Challenger prototypes testing with massive tires. The prototypes look extremely similar to the current Challenger SRT Hellcat with the same hood scoop, front fascia design, rear spoiler construction, and rear end. The white and purple vehicles, though, are wearing extremely wide tires. The extra-wide rubber on the prototypes appear to have a similar tread design as the ones found on the Dodge Viper ACR, which features the grippy Kumho Ecsta V720. While the ACR wears 295 mm tires at the front, the car's rear tires are massive at 355 mm. The tires found on the prototype don't appear to be as large as the ones found on the ACR, but are expected to be larger than the current Challenger SRT Hellcat's, which are Pirelli P Zero Neros measuring 275 mm at all four corners. The Challenger ADR, with its wider, stickier tires is expected to cater to drivers that are looking to put all of the supercharged 6.2-liter V8's power to the ground. The rear-wheel-drive ADR is expected to come with a wide-body kit, which is missing from the prototypes. The Hellcat-powered, wide-body Challenger ADR is expected to make an appearance later in 2017, with an all-wheel-drive model (sans Hellcat engine) known as the GT AWD following closely thereafter. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Dodge Challenger ADR Spy Shots View 16 Photos Spy Photos Dodge Coupe Performance prototype testing dodge challenger srt hellcat