Gorgeous Dodge Ram 1500 Quad Cab *srt10 Looks* Black Beauty Upgrades on 2040-cars

Auto blog

Dodge Journey recalled for freezing fluid lines

The Basics: FCA is recalling 10,944 examples of the 2009-16 Dodge Journey - specifically those equipped with the optional engine block heaters and located in extremely cold climates. The Problem: Power steering fluid lines may leak when starting the engine in extremely cold weather, which would increase the amount of effort required to steer the vehicle. Injuries/Deaths: FCA reports that it is "unaware of any related injuries or accidents." The fix: The manufacturer is working on expediting replacement parts to resolve the issue in those vehicles potentially affected. If you own one: Expect to hear from the manufacturer soon to arrange service. Your chances of being affected are higher if you live in Canada, where a far greater number – estimated at 187,436 – of Journeys may be affected. Related Video: STATEMENT: FLUID LINE May 6, 2016 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 10,944 U.S.-market midsize crossover vehicles equipped with optional block heaters to address fluid-line durability in extreme, cold-weather conditions. An investigation found some lines carrying power-steering fluid may leak at engine start-up, when the vehicle is subject to extreme cold. Steering is not lost in such circumstances. However, if a vehicle is so-affected, the amount of physical effort required to steer may increase. The Company is unaware of any related injuries or accidents. Affected are certain model-year 2009-2016 Dodge Journey vehicles. An estimated 187,436 vehicles in Canada are also subject to this recall. Replacement parts are expected to become available soon. Affected customers will be notified accordingly. FCA US urges customers to follow the instructions on all recall notices. Customers with questions may call the FCA US Customer Care Center at 1-800-853-1403. Featured Gallery 2014 Dodge Journey Crossroad View 19 Photos News Source: FCA Recalls Dodge Crossover Minivan/Van dodge journey

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge Challenger Scat Pack adds power and noise, with a warranty

If you want to go fast, there's certainly nothing wrong with the Dodge Challenger SRT8. With 470 horsepower and 470 pound-feet of torque for 2014, there's certainly not much to complain about. But what if you want something more aftermarket in flavor? There's no shortage of options, but while turning to the tuner world will make your car plenty fast, that extra power won't just shred rear tires, it'll torch your warranty, as well. That's where Dodge's Scat Pack comes in.
With three stages of mods for both the 5.7 and 6.4-liter Hemi V8s Challenger (as well as the 5.7-liter Charger and, soon, the four-pot Dart), the Scat Pack cars give drivers all the power, aggression and noise of a heavily modded aftermarket car while maintaining the piece of mind provided by the Dodge warranty.
Power gets bumped up to 485 horsepower and 475 pound-feet of torque with the 6.4-liter Scat Pack, while the 5.7-liter can provide up to 58 hp and 47 lb-ft of torque to add to the stock engine's 375 horsepower and 410 pound-feet. It's the latter engine that can really get some work done, with upgrades ranging from the mundane - intake and exhaust - to the racy, like the ported heads and high-flow headers.