2009 Dodge Ram 1500 4x4 Crew Cab Slt Bighorn Hemi 09 on 2040-cars

Auto blog

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.

Chrysler recalling 280k Dodge Ram 1500 pickups over axle seizures

Following a June investigation by the National Highway Traffic Safety Administration, Fiat Chrysler Automobiles will be recalling 280,000 Dodge Ram pickups from model year 2005. The issue, NHTSA told The Detroit News, centered on a loose pinion nut, which could cause the rear axle to seize and, potentially, the driveshaft to detach. The affected vehicles were built between January of 2004 and August of 2005, while of the 280,000 trucks, only 257,000 were sold in the US market. According to The News, the recall will begin on February 13, and will see owners report to dealerships to have "a retention feature" added to the pinion nut.

Say goodbye to the Dodge Dart and Chrysler 200

Fiat-Chrysler CEO Sergio Marchionne outlined an update to the company's five-year business plan Wednesday, and among the changes, the Dodge Dart and Chrysler 200 sedans will soon be phased out. The company's presentation to investors states that the "market shift from cars to trucks and UVs [utility vehicles is] now seen as permanent shift in demand," and FCA wants to respond as quickly as possible. Killing the 200 and Dart will allow FCA to build more Jeep and Ram models at the Sterling Heights, MI, and Belvidere, IL, plants where the sedans were produced. We already knew FCA was planning to shift 200 and Dart production to Mexico, to free up the Sterling Heights facility for Ram 1500 production, and the Belivdere site for Jeep Cherokee output. The Cherokee will move from its current home in Toledo, OH, to allow for increased Wrangler production. It's no shock that FCA wants to shift its focus to crossovers and trucks. In December 2015, for example, combined sales of the Dodge Dart and Chrysler 200 were 15,310. The Jeep Cherokee, which uses the same platform as the Dart and 200, outsold both models combined, with 24,049 sales. Both the Dart and 200 had troubles from the beginning. Marchionne recently blamed designers for the 200 not receiving a Consumer Reports 'recommended' rating, and the Dart was one of the lowest-scoring cars in a CR reliability study. Featured Gallery 2013 Dodge Dart: Review View 27 Photos Related Gallery 2015 Chrysler 200 View 43 Photos Image Credit: Copyright 2016 Drew Phillips / AOL Chrysler Dodge Jeep RAM FCA confirmed