2000 Dodge Ram 1500 Regular Cab Pickup Truck on 2040-cars

Auto blog

Thieves still love older Hondas and pickups most, says NICB [w/video]

No one wants to have their car stolen, but a new study by the National Insurance Crime Bureau has some bad news for older Honda owners and pickup drivers. Fortunately, it has better news for drivers overall. The group is reporting that according to preliminary data from the Federal Bureau of Investigation, thefts were down 3.2 percent in 2013 (versus 2012) to fewer than 700,000 cars. That's the lowest figure since 1967. That's also less than half of the peak of over 1.66 million thefts in 1991. "The drop in thefts is good news for all of us," says NICB President and CEO Joe Wehrle. "But it still amounts to a vehicle being stolen every 45 seconds and losses of over $4 billion a year."
Honda drivers might not find it such good news with older Accord and Civic models topping this year's theft study. Toyota and Dodge can't really celebrate, either, with two models each on the list, as well. Overall, this year's list was split evenly between foreign and domestic models, which were mostly pickups.
The 10 most likely vehicles to be stolen in 2013 were:

2015 Dodge Charger priced from $27,995, Hellcat from $63,995*

Ladies and gentlemen, let's get the most salient bit of information out of the way right off the bat: $63,995*. That's the amount of money Dodge dealers will be asking for (at the very least, naturally) for a 2015 Charger Hellcat (*plus $995 for destination on all pricing figures). That rather reasonable sum will bring home its buyer a 6.2-liter Hemi V8 engine boasting a supercharger to post such gaudy figures as 707 horsepower and 650 pound-feet of torque, leading to a top speed of 204 miles per hour to go along with an NHRA-certified quarter-mile time of 11.0 seconds.
With that out of the way, the rest of the 2015 Dodge Charger pricing information breaks down as follows: $27,995 will deliver a sedan with a 292-horsepower 3.6-liter Pentastar V6 engine, mated to an eight-speed automatic transmission. Moving up one step of the ladder nets the buyer an SXT model with the same engine, but a nicer chunk of technology and optional equipment for a $2,000 premium. All-wheel drive adds another $3,000. Hemi V8-powered R/T models now boast an eight-speed transmission bolted to the same well-loved 370-horsepower engine as before, for a base price of $32,995.
The SRT 392 model that had hitherto been the top-performing Charger brings with it an asking price of $47,385 while bargain hunters can equip a Charger R/T Scat Pack machine with that same 485-horsepower 6.4-liter Hemi, albeit with somewhat less posh interior bits and pieces, the removal of the 392's adjustable suspension and hi-po wheel and tire package for $39,995.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat