1994 Dodge Ram Pickup Black on 2040-cars

Auto blog

Chrysler Recalling 870,000 SUVs For Brake Defect

Chrysler is recalling nearly 870,000 SUVs because corrosion may make the vehicles' brakes harder to use. Jeep Grand Cherokee and Dodge Durango SUVs from the 2011 through 2014 model years are involved. Chrysler says crimp joints in the brake boosters can corrode if they're exposed to water. If the water freezes, the boosters won't aid braking as they usually do. Chrysler began investigating after some customers said their brakes felt too firm when pressed down. The company knows of one accident, but no injuries, due to the defect. Dealers will install a shield to protect the boosters for free and replace boosters that aren't working properly. Chrysler has since changed the design to make the boosters more corrosion resistant. Chrysler will notify owners of the recall, which involves 867,795 vehicles. Related Gallery Safest Crossovers For The Budget-Conscious Family View 10 Photos Recalls Chrysler Dodge

We cruised Woodward in the 2015 Dodge Challenger SRT Hellcat [w/video]

We were definitely rock stars at the 20th edition of the Dream Cruise.
The yell came from somewhere in the crowd: "Hey Hellcat, push it!" We obliged with a jab of the throttle, and the 707 horses of the 2015 Dodge Challenger SRT Hellcat roared to life. It went on like this. All weekend. It's one thing to attend the Woodward Dream Cruise, it's quite another to star in it.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat