Find or Sell Used Cars, Trucks, and SUVs in USA

1949 Dodge 3/4 Ton Dually Pickup Truck on 2040-cars

US $4,200.00
Year:1949 Mileage:96069 Color: red/'orange /
 grey
Location:

Mishawaka, Indiana, United States

Mishawaka, Indiana, United States
Advertising:
Transmission:manual 4 speed
Body Type:Pickup Truck
Engine:6 cyl
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Year: 1949
Number of Cylinders: 6
Make: Dodge
Model: Other Pickups
Trim: standard
Cab Type (For Trucks Only): Regular Cab
Drive Type: 2 wheel drive
Mileage: 96,069
Sub Model: N/A
Disability Equipped: No
Exterior Color: red/'orange
Warranty: Vehicle does NOT have an existing warranty
Interior Color: grey
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"Has dents some scratches.paint loss, windshield glass is cracked.very little rust."

Rare dually truck, 3/4 ton, hardly any rust, runs, drives, many parts bought for it. Has dents some scratches. 4 speed with granny gear. Needs carb rebuilt (have kit). Have running boards, and rear(standard width) fenders for it also. Do to me loosing the locking gas cap keys , I can only start it up to hear run. No test runs unless I find the key or get it of . This truck is also for sale locally. *Truck sold as is *. 

NOTE: This is a NON-numbers matching truck. I believe the cab is off a 1/2 ton. This truck had a frame off restoration in the late 90's I have picts to prove.
I have owners manuals, service manuals, a radio, hood ornament, steering wheel, interior windshield trim, parking lites.
I had the original radiator repaired. Truck runs and drives but because of the older hard rubber tires it rides hard, but has a nice soft restored seat. Interior is dark grey and black. It has a headliner but will need to be replaced (mice damage). This is a local pickup only , cash payment due at time of pickup. This truck will be here after the sale for 2 weeks , unless other  arrangements are made, it will be re listed. thanks.
( I can message more picts.).

Auto Services in Indiana

Wood`s Battery & Auto Elctrc ★★★★★

Automobile Parts & Supplies, Batteries-Storage-Wholesale & Manufacturers, Battery Storage
Address: 1263 E Morgan Ave, Evansville
Phone: (812) 425-4888

Wilsons Auto Repair ★★★★★

Auto Repair & Service, Emission Repair-Automobile & Truck
Address: 1207 E Lincoln Hwy, Dyer
Phone: (866) 595-6470

Tread Express Tires Inc ★★★★★

Auto Repair & Service, Tire Dealers, Tires-Wholesale & Manufacturers
Address: 828 S 17th St, Sellersburg
Phone: (502) 749-4194

The Zone Honda Kawasaki ★★★★★

Automobile Body Repairing & Painting, Motorcycle Dealers, Motorcycle Customizing
Address: 4520 W 63rd St, Whiting
Phone: (773) 767-7280

Ted Brown`s Quality Paint & Body Shop ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting
Address: 2722 Epworth Rd, Newburgh
Phone: (812) 853-5290

Swinehart Auto Service ★★★★★

Auto Repair & Service, Automobile Detailing
Address: 24337 County Road 16, Elkhart
Phone: (574) 522-0909

Auto blog

Dodge idles Viper production again at Conner Avenue

Mon, 07 Jul 2014

You've got to hand it to Dodge for having the gumption to put the original Viper into production in the first place. It was, after all, much more of an emotional decision than a practical one, and a move which saw the first production V10 engine placed in a road car - long before the advent of the Lamborghini Gallardo, Audi R8, Porsche Carrera GT or Lexus LFA, not to mention the other Ford, BMW and Volkswagen Group models that used such engines.
It's now been 22 years since the first Viper entered production and the Viper still rolls on several generations later, but we're sad to say that courageous decision has not always been met with overwhelming sales success. In fact parent Chrysler was forced to idle the Conner Avenue plant where the Viper is made back in April due to slow sales. And while production resumed again as planned on June 23, it apparently didn't do the trick.
As a result, Chrysler corporate communications chief Shawn Morgan revealed to Autoblog that the assembly line has been shut down again for another two weeks. The line was up and running for nearly two full work weeks from June 23 until the holiday weekend that started on Thursday, July 3. But instead of coming back online today as planned, it's been idled again for the weeks of July 7 and 14. That means it will be July 21, at the earliest, before the serpentine supercars start slithering down the assembly line at Conner Avenue again. Once it does, however, production is set to resume at the same pace it was before the shutdown.

Dodge Durango SRT, Ford F-150 Lightning and why we like physical controls | Autoblog Podcast #678

Fri, May 14 2021

In this episode of the Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by News Editor Joel Stocksdale. They start things off by discussing cars they've been driving, including the 2021 Dodge Durango SRT and the 2021 Toyota Camry Hybrid XSE. Next they discuss the announcement of the Ford F-150 Lightning electric truck, Genesis G70 Shooting Brake and the use of physical controls in cars instead of touchscreens. Finally, they help a reader spend some money. Autoblog Podcast #678 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Cars we're driving 2021 Dodge Durango SRT 2021 Toyota Camry XSE Hybrid News Ford F-150 Lightning EV announcement Genesis G70 Shooting Brake Opinion: Physical controls add to the driving experience Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Autoblog is now live on your smart speakers and voice assistants with the audio Autoblog Daily Digest. Say “Hey Google, play the news from Autoblog” or "Alexa, open Autoblog" to get your favorite car website in audio form every day. A narrator will take you through the biggest stories or break down one of our comprehensive test drives. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Green Podcasts Dodge Ford Genesis Toyota Ford Lightning

A look at the Dodge Demon's drag settings, modes, and go-fast tech

Thu, Mar 9 2017

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.