2000 Dodge Neon on 2040-cars

Auto blog

Dodge Challenger SRT Hellcat vs. Chevrolet Camaro ZL1 in latest Head 2 Head

"Olympian" is one of the terms we use to signify the greatest height, the seat of the gods. Yet Mt. Olympus is the second-highest peak in the Balkans ranges, overshadowed by the crest at Musala in Bulgaria's Rila mountains. Both great heights, but one is a little higher. That's how we get the Olympian Chevy Camaro ZL1 pitched at the Musalic Dodge Challenger SRT Hellcat in Motor Trend's latest episode of Head 2 Head. The side-by-side spec sheet is filled with farcical numbers. For the ZL1, that's a 6.2-liter V8 with 580 horsepower, 556 pound-feet of torque, a 4,051-pound curb weight, 0-to-60 miles per hour in 3.9 seconds, a quarter-mile time of 12.2 seconds and a base price of just $57,800. Opposing that, the Hellcat wrings out its 6.2-liter V8 for 707 hp, 650 lb-ft of torque, weighs 4,449 pounds, does the quarter in 11.7 seconds and has a base price of just $60,990. Except in the case of the Hellcat, when Motor Trend put it on the dyno the machine spit out a reading of 672 hp and 606 lb-ft at the wheels. If there's a 10-percent driveline loss through those beefed-up internals and heavy-duty eight-speed transmission, that means the Hellcat is actually rated at about 750 horsepower and 700 lb-ft. But once they get put on a closed-off strip of coast road in Northern California, there are only a few strands of hair between their respective performances. That's not the case for they sensations provide; host Jonny Lieberman calls one of them, "One of the most incredible cars ever made," and says, "It changes everything." Watch the video above to see who got the verdict and how. Related Video:

NHTSA closes investigation on 4.7M FCA power modules, no recall

FCA US hasn't had the best time with recalls as of late. Not only did the company recently agree to greater safety oversight and paid $105 million to the government, that came just days after hacking fears prompted a 1.4-million model recall campaign. However, a recent decision to close an investigation by the National Highway Traffic Safety Administration means that the automaker doesn't have to worry about another major recall possibly affecting 4.7 million vehicles, according to the agency's report (as a PDF). Last September, the Center for Auto Safety petitioned NHTSA to investigate an alleged problem with the totally integrated power module (TIPM) on these FCA US models. The group claimed that a fault with the component could cause a variety of maladies, including stalls, not starting, catching fire, unintended acceleration, and airbag non-deployment. At the time, it also submitted 70 cases where this had reportedly happened. According to NHTSA, "no valid evidence was presented in support of claims related to airbag non-deployment, unintended acceleration, or fire resulting from TIPM faults and these claims were found to be wholly without merit based on review of the field data and design of the relevant systems and components." The agency did find signs of an issue with the fuel pump relay in some Jeep Grand Cherokees and Dodge Durangos, but FCA US issued recalls for the problem in September 2014 and February 2015. Without anything else to go on, the Feds don't think it's worth investigating this topic any more.

FCA seeks partner to keep building Dodge Dart, Chrysler 200

Mere weeks after FCA announced it was shutting down production of the Dodge Dart and Chrysler 200, new hope emerges to give the sedans a stay of execution. Speaking at the Geneva Motor Show last week, Sergio Marchionne said that the company was looking for a partner "who is better at it than we are and who has got capacity available" in order to continue building the models on its behalf. "There are discussions going on now," said Marchionne, according to Motor Trend. "I think we will find a solution. We continue to talk. It's both a technical solution and an economic one. We need to find a solution that works economically." Contracting vehicles to be manufactured offsite is more common practice among European automakers than it is with American ones. Chrysler's former patron Mercedes, for example, has the G-Class built for it by Magna Steyr in Austria, the A-Class by Valmet in Finland, and the R-Class by AM General in Indiana (even though it's no longer sold in the US). This arrangement would, on the surface at least, appear more similar to the deal that Toyota struck with Mazda to build the Scion iA, drawing on the contractor's expertise and capacity to build the small sedan on the client company's behalf. Only rather than basing a new model on one of the partner's existing ones, this deal would ostensibly continue building FCA models on FCA platforms using FCA components. We'll have to wait to find out with whom FCA strikes up the manufacturing deal, but we wouldn't be surprised to see Marchionne turn to a partner he already knows. The company is, after all, at the center of an intricate web of joint ventures and manufacturing contracts. The Fiat 124 Spider, for example, is built by Mazda. The Fiat Sedici that preceded the 500X was built by Suzuki. Models like the Dodge Stealth and Eagle Talon were built in Illinois at the Diamond-Star Motors joint venture before Mitsubishi took it over altogether. And Dodge continued selling the Mercedes-made Sprinter long after DaimlerChrysler split. The Ram ProMaster, though built by FCA in Mexico for the North American market, stems from a partnership in France with PSA Peugeot Citroen. And the ProMaster City is built in a joint-venture plant in Turkey, from which it's also sold by GM as an Opel in Europe and a Vauxhall in the UK. With all those deals coming and going, after all, what would one more add to the complexity?