2008 Dodge Magnum R/t Awd Wagon 4-door 5.7l Leather, Nav, Dvd on 2040-cars

Auto blog

Chrysler recalling 67k trucks with manual transmissions

Earlier this month, Chrysler announced the recall of some 280,000 pickup trucks over concerns that their axles could seize up. Now the automaker has announced an entirely separate recall of another 66,819 trucks over the springs that could break in the clutch ignition interlock switch. The recall affects Dodge Ram 1500, 2500 and 3500 pickups, as well as the Dodge Dakota and Mitsubishi Raider. The issue is relevant only to those trucks fitted with manual transmissions, from the 2006 and 2007 model years and manufactured between July 1, 2005, and July 31, 2006. Since a broken spring could, according to statements issued by the National Highway Traffic Safety Administration and FCA US LLC (previously known as the Chrysler Group) prevent the vehicle from starting, or cause it to move unintentionally once the ignition kicks over, the automaker will begin notifying owners of the affected vehicles just before Valentine's Day to bring their trucks into their local dealers to have the clutch ignition interlock switch replaced. FCA emphasizes, however, that the unintended movement would only occur "in rare cases" and only "if recommended starting procedures are not followed." Only one such case is known to have occurred, but it did regrettably result in a fatality. Statement: Clutch Ignition Interlock Switch December 29, 2014 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary global recall of an estimated 66,819 older-model pickup trucks equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. An investigation by FCA US engineers discovered switches in certain model-year 2006 and 2007 pickups may be equipped with spring wire that differs from wire used in previous switches. The alternate wire may break and, as a result, the vehicles may not start. In rare cases, a vehicle may – if recommended starting procedures are not followed – exhibit unintended movement when its ignition key is turned. The Company is aware of one fatality related to this campaign. It stemmed from the single known accident involving this population of vehicles. The recall covers certain Dodge Dakota, Dodge Ram 1500, 2500, 3500 and Mitsubishi Raider pickups. Switches with the alternate wire were not used in any vehicles produced before July of 2005, or after June of 2006. The Dakota and Raider are no longer in production.

The last time Dodge recycled the Demon name, it was for a Miata fighter

We and the rest of the automotive world are eagerly awaiting the reveal of the Dodge Challenger Demon. And why wouldn't we be? It's going to be a Hellcat, but with less weight, bigger fenders, more performance, and more Vin Diesel. This isn't the first time we've been excited about a Demon from Dodge, though. Ten years ago, Dodge had another demonic car, but it was very different from the new one. The Demon of 2007 was a lithe little roadster that looked primed and ready to take on the Miata, as well as the now-departed Solstice and Sky twins. The Demon was just under an inch shorter than the MX-5 and the Solstice, and it packed a 172 horsepower 2.4-liter four-cylinder that fell right between the Miata's 170 and the Solstice's 177 outputs. Dodge's estimated the curb weight, which for a concept is largely theoretical, also slotted between the two cars at 2600 pounds. That was about 150 more than the Mazda, and about 200 less than the Pontiac. The pitch perfect specifications were presented in a crisp two-seat roadster wrapper. In many ways, it looked like a baby Viper, with a menacing crosshair grille, slanted headlights, and fat rear fenders. The Demon's line's were brutally simple and geometric, too. They didn't seem far removed from the first-generation Audi TT. The interior was also plain and simple. The key highlights were a horizontal aluminum accent that ran the width of the dash, echoed by an aluminum-covered center console. The instrument cluster was uncluttered, with just four gauges, and the only controls were some climate knobs, a double-DIN head unit, and a six-speed manual. It turns out that the 2007 Demon didn't drive very well, though. You see, we actually drove this concept back in the day, and like many concepts, it still had a long way to go to be production ready. The gearbox would grind, the ride quality was terrible. However, the interior was roomy, and the engine sounded suitably grumbly, if a bit coarse. At the time, we said Dodge should absolutely build the little roadster. In retrospect, the company probably made the right decision not to invest in the Demon. The small rear drive sports car segment was, and still is, an extremely niche market. It would have been a big investment for little return, something FCA today is trying to avoid. This is all before taking into account the fact that the recession was just around the corner. In the end, we can't be too sad though.

Weekly Recap: Ferrari plans to gradually increase production by 2019

Ferrari has long been known for the exclusivity of its performance machines. It's on a different level than Porsche, BMW, and Mercedes. But as it transitions to a new era of independence from Fiat Chrysler, Ferrari is going to get a little less exclusive. It's by design, and it means a subtle, slow ramp-up of production – a move Ferrari believes will ensure its future by meeting growing demand in new markets. The strategy was detailed in SEC documents filed this month as part of the company's pending stock offering. The files reveal Ferrari will gradually increase shipments to about 9,000 units per year by 2019. This is a reversal of Ferrari's 2013 plans to cap production at 7,000 cars annually, which it hit on the nose that year. Ferrari shipments inched up to 7,255 in 2014, though that's down from 2012's record tally of 7,405. Ferrari is a vastly different operation than it was in 2013. Longtime chairman Luca di Montezemolo stepped down last fall, and FCA chief executive Sergio Marchionne has been overseeing the company since then. Its IPO has attracted high levels of attention from enthusiasts and investors. As expected, demand has reportedly outstripped the availability of the stock, which has an estimated offering price of $48 to $52 a share. Speaking of more Ferraris, the company revealed a limited-edition model this week called the F12tdf (shown above). Based on the F12 Berlinetta, the car is a salute to the Tour de France endurance auto race that Ferrari dominated in the 1950s and '60s. The V12 engine's output increases to 769 horsepower, while weight is cut by 243 pounds – allowing for a sprint to 60 mph in 2.9 seconds. Dramatic carbon-fiber elements and a radical redesign of the body panels give the F12 a more dramatic look. It will be limited to 799 units over the life of the car. If this is how Ferrari is increasing production, we're more than okay with the company's new strategy. OTHER NEWS & NOTES Tesla software unlocks Autopilot features Tesla released the latest version of its software for the Model S this week, which allows the all-electric sedan to drive in a semi-autonomous state called Autopilot. Tesla Version 7.0 enables the Model S to maintain lane position, change lanes by touching the turn signal, and manage the car's speed using an advanced, traffic-sensing cruise control. It also has a parallel parking feature, which searches for open spots and then parks your Tesla.