2019 Dodge Grand Caravan on 2040-cars

Auto blog

2015 Dodge Challenger SRT Hellcat with '600-plus horsepower' officially unveiled [w/video]

Dodge has officially unveiled the most powerful vehicle to ever wear the Challenger name - the SRT Hellcat - complete with over 600 horsepower courtesy of a supercharged, 6.2-liter Hemi V8. It will be offered alongside the 485-hp Challenger SRT.
The new, force-induced V8 isn't just the most powerful ever fitted to the Challenger, it's the most powerful eight-cylinder Chrysler Group has ever built. Power figures aren't finalized, so expect to see "over 600 hp" bandied about quite a lot. That fury will be channeled through either a six-speed manual or eight-speed automatic. Yes, over 600 ponies through an eight-speed auto. So far, the only vehicle we know of that delivers more output through that many gears is the as-yet untested Chevrolet Corvette Z06. Sadly, we don't have performance metrics just yet, although if this thing can't crack four seconds to 60 miles per hour, we'll be pretty surprised.
As is the theme nowadays, the 2015 Challenger SRT features a number of driving modes, governing power output, shift speeds for the 8AT, steering effort, traction control settings and suspension settings. There are three pre-programmed options - Default, Sport and Track - and a Custom mode that allows drivers to mix and match to their heart's content.

Dodge gives 2015 Viper slight power increase, new GT model

With its troubling sales figures, the newly rechristened SRT Dodge Viper needs to come out swinging for 2015. To do that, Dodge has made a number of tweaks and changes that will hopefully carry the V10-powered sports car into more successful days.
First up for 2015 is a new GT model, which aims to marry the reasonable price of the base car with the adjustable suspension and trick stability control program of the GTS model. The GT also sports a cabin that's covered in Alcantara suede and Nappa leather as standard.
Also new for 2015 is the SRT TA 2.0 Special Edition, which expands on last year's Viper TA by adding new aerodynamic bits and bobs, including a larger rear wing, which ups downforce at 150 miles per hour from 278 pounds to 400 pounds.

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.