2012 Crew Used 3.6l V6 24v Fwd on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Rare Dodge Daytona found in barn heads for auction

An American icon is headed to Mecum's Kissimmee, Florida auction next January. Charlie Lyons, owner of a restoration shop focused on old Chrysler products, got a lead on a two-owner 1969 Dodge Charger Daytona that had been sitting in a barn in Glenwood, Alabama for decades. Dodge built 560 Charger Daytonas (Canada and US production) to homologate the model for NASCAR racing, and then that car and the successor Plymouth Superbird terrorized NASCAR tracks for 18 months. The production car, however, 18 feet long and considered ugly, wasn't popular at the time, so many were beat up or simply disappeared. Around 385 are thought to exist today. Lyons said the first owner of this car was the town judge, who bought it for his wife. In 1974 the second owner - just 18 years old at the time - bought it for $1,800 so he could drive it to Panama City, Florida, for Spring Break, and had flames painted on the front fenders and the scallops trimmed in white. Otherwise this barn find is complete and stock, with matching numbers throughout, R4 Charger Red paint and a white tail, bucket seats, center console, three-speed TorqueFlite automatic, and 20,553 miles on the 440-cubic-inch Magnum V8. Hot Rod has the long story of how Lyons found the car and convinced the owner to sell for what he jokingly called "a shoebox full of folded money." Hagerty says a concours-worthy model can command $262,000. Mecum's pre-sale estimate for this Charger Daytona is $150,000 to $180,000. That sounds steep, but Mecum did sell another perfectly restored Hemi-powered 1969 Charger Daytona for $900,000 at this year's Kissimmee auction to actor David Spade. Related Video:

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.