2001 Dodge Durango Base Sport Utility 4-door 4.7l on 2040-cars
Richland, Michigan, United States
For sale is my 2001 Dodge Durango. It is my daily driver and I have had no issues with it.. It has a remote start, third row seating, keyless entry, cloth seats and 4 wheel drive. It has 134.000 miles.
The 4 wheel drive works great and has no issues at all. It worked great this last winter. The down sides? It does need a new muffler. The muffler has a hole in it and make it a little loud. Its not too bad and I drive it every day, but it could use a new one. It also has a little rust, consistent with its age and from what I have seen from other Durangos, common. It has a rusted through spot on the lower left of the tailgate, and a surface rust spot on both the passenger side and the drivers side rear quarter panel. it also has some surface rust on the bottom of the drivers side doors, but its only surface Other than those couple issues, it runs great and I have had no issues with it. I would say the tires are at about 60 percent. This would make a great vehicle for anybody or a great plow truck. |
Dodge Durango for Sale
Dodge durango 2001(US $4,200.00)
2002 dodge durango sport sport utility 4-door 4.7l
2013 dodge durango crew sport utility 4-door 3.6l "no reserve"
Beautiful and well maintained 2006 dodge durango sport utility vehicle
2000 dodge durango slt plus sport utility 4-door 4.7l
2002 dodge durango r/t sport utility 4-door 5.9l(US $4,100.00)
Auto Services in Michigan
Zoomers Express Care ★★★★★
Wetmore`s Inc ★★★★★
Westnedge Auto Repair ★★★★★
Warren Transmission ★★★★★
Village Ford ★★★★★
Vehicle Accessories ★★★★★
Auto blog
Dodge Viper now available in matte finish
Tue, Jun 23 2015The prospect of buying a new Dodge Viper just got that much more enticing with the introduction of matte-finish paint direct from the factory. Available as part of the "1 of 1" customization program, the matte finishes aren't being offered in just a handful of colors like some other automakers do: customers will be able to specify a matte finish on any of the 8,000 colors that are already part of the program's palette. The matte finish option adds yet another step to the exhaustive hand-painting process that Dodge offers on the Viper - a painstaking endeavor that takes upwards of 145 man hours to complete. Specialists start by applying a base coat and a clear finish, followed by the paint and clear coat. The finished body panels are then smoothed with 1,000-grit paper and polished. A second sanding process is required for the matte finish before the application of a matte clear coat. Specify custom stripes (available in five colors or by custom order) and they're applied under the paint, not as decals on top. The availability of the matte finish in conjunction with the stripe options and new satin badging and fuel cap leads to over 50 million combinations. Needless to say, that means no two Vipers need ever leave the Conner Avenue assembly plant the same – though there will surely always be certain favorite combinations, especially on those units ordered from outside the customization program. Related Video: DODGE EXPANDS INDUSTRY-FIRST '1 OF 1' VIPER CUSTOMIZATION PROGRAM WITH NEW MATTE-FINISH PAINT OPTION - New matte-finish exterior paint available on all of Viper '1 of 1' program's 8,000 exterior color options and 24,000 stripe options - Viper's custom '1 of 1' exterior paint options double to 16,000 exterior colors and 48,000 unique strip combinations - Matte finish available in all exclusive '1 of 1' program and standard production colors - In addition to matte-finish exterior paint, Viper customers can choose between satin chrome or satin black badging and fuel filler door for a sinister appearance - Dodge Viper owners can build their one-of-a-kind Viper from more than 50 million unique build configurations for the ultimate in model year exclusivity June 19, 2015 , Auburn Hills, Mich. - The Dodge brand continues to expand the Viper's exclusive production elements like never before.
That thing got a Hemi? Mopar engine kits make it easier to say yes
Wed, Nov 2 2016Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016
Houston road rage incident devolves into all-out brawl
Tue, May 17 2016The video is no longer available. It appears the associated account has been terminated. Chaos erupted on a Houston freeway last weekend when an altercation spiraled out of control and ended up in a battle-royale style brawl in the middle of traffic. According to KTRK, David Dao and his daughter were traveling along FM 1960 on the morning of May 14 when they came upon a white Honda and a blue Ram truck parked in the right lane. The drivers and passengers of the vehicles were engaged in a spirited argument about something that had happened moments before Dao pulled up. Dao parked in his lane to block traffic in an attempt at making sure other drivers didn't hit the people fighting in the right lane, and instructed his daughter to start filming the incident in case they were needed as witnesses. As Dao's daughter filmed, the incident quickly escalated–harsh words were exchanged, a drink was thrown in a woman's face, and then the driver of the Ram kicked in the Honda's grille. "I couldn't believe it. As soon as he kicked the grille, I was like, 'This is going down now," said Dao. "I was thinking this is going to be bad. At that time, I knew because there was physical damage." As soon as the Ram driver kicked the Honda the entire situation went sideways and devolved into a huge brawl, with the people from both vehicles throwing wild punches and grappling with one another. A woman who was a passenger in the Ram attempted to break up the scrum but took a haymaker in the face for her troubles. Eventually, the fight broke up and the people returned to their vehicles which Dao assumed meant that the altercation was over. Apparently though, the Ram driver felt he hadn't made his point, and he reversed at high speed into the Honda, smashing the fascia and buckling the hood. The Ram then sped off westbound on U.S. 290 with the Honda on its tail. According to the Harris County Sheriff's Office, the incident was not reported and there is no word what happened to the brawlers after they left the scene. Related Video: News Source: KTRK Weird Car News Dodge Lexus RAM Driving Safety Truck Videos Sedan road rage houston fight