1999 Shelby Sp360 Viper Blue #169 Of 200 Made 5.9l V8 Magnium Super Rare!! on 2040-cars

Auto blog

2016 Jeep Wrangler recalled over impact sensor wiring

Fiat Chrysler just announced a pair of recalls totaling nearly 311,000 units. The bigger recall affects certain 2016 and 2017 model year Jeep Wranglers. Although, since FCA claims all of the affected 2017s are in the company's hands, really, only 2016 owners should pay attention here. The affected Wranglers suffer from an issue where wiring disconnects from impact sensors in certain types of crashes, potentially preventing the airbags and pretensioners from activating. FCA uncovered the problem in what its press release calls "a routine, in-house crash test" and claims "service availability is imminent." The affected Jeeps require a simple rewiring. The other recall, announced Tuesday, is more of a fleet issue, affecting 2007 to 2013 model-year Ram 2500 and 3500 pickups and 3500, 4500, and 5500 chassis cabs and 2011 to 2014 Dodge Charger Pursuit police vehicles. There's a problem with "premature diode wear" in alternators that are subject to "frequent load cycling, at or near maximum amperage, [or] in hot ambient temperatures." Affected alternators could short out, causing a vehicle to stall or potentially catch fire. FCA lists 182,743 affected Wranglers in the US, 18,011 in Canada, 3,087 in Mexico, and 20,948 in global markets. The Ram/ Charger Pursuit recall lists 74,833 vehicles in the US, 10,077 in Canada, 1,088 in Mexico, and 134 outside the NAFTA region. Of all those vehicles, the Jeep recall hasn't caused any injuries or fatalities, while FCA says it's aware of one "potentially related injury" and no accidents due to its fleet vehicle recall. FCA says it will notify owners/operators of affected vehicles when service appointments are available. As per usual, all the work is free of charge. Related Video:

2016 Dodge Viper ACR is ready to take a bite out of the Corvette Z06 [w/video]

The Dodge Viper ACR is back, and as Fiat Chrysler Automobiles tells it, it's the most venomous breed ever born. Before you get too excited, the 8.4-liter V10 produces 645 horsepower; five more than the standard Viper and five less than the supercharged Chevrolet Corvette Z06. It's unclear why Dodge didn't extract more from the huge engine, although we somehow imagine that certain people in Maranello, Italy had a say in the matter. Instead of blessing the ACR variant with bunches of extra output, Dodge instead turned to an aggressive aerodynamics package that it claims delivers nearly a ton of downforce at the Viper's maximum speed of 177 miles per hour. The total aero package includes an adjustable, twin-element, carbon-fiber rear wing, carbon-fiber diffuser, an extendable front splitter, and dive planes. Those big louvers on the hood? Yeah, they're removable, too. The "race-tuned" suspension uses coil-over Bilstein shocks that offer ten different settings and up to three inches of height adjustment. Kumho Ecsta V720 tires were built specifically for the Viper ACR, and come in 355/30 in back and 295/25 in front, with 19-inch wheels at all four corners. Along with the aero improvements, Dodge is claiming the Viper can pull a race-car-like 1.5Gs in higher-speed turns. Carbon-ceramic brakes with six-piston calipers add the stopping power that's greater or equal to the ACR's cornering performance. Dodge was also keen to reduce weight, taking some rather dramatic measures in the effort. The stereo has just three speakers, while the electric function was removed from the seats. Even the carpet has been replaced with a "lightweight" alternative. Finally, Dodge is offering up the innovative 1 of 1 customization it pioneered with the Viper GT earlier this year. That means that not only can you get the fastest Viper ever built, but it'll be entirely your own when you take delivery.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.