1973 Dodge Dart Swinger on 2040-cars

Auto blog

Dodge Viper ACR reportedly green lit [w/video]

The Dodge Viper might be getting a little more venomous in the near future thanks to a return of the performance-honed ACR trim. According to an anonymous source leaking the info to Allpar, the version would go into production in July as a 2016 model year vehicle. FCA US showed a concept for a future ACR (pictured above) at the 2014 SEMA Show that sported carbon fiber parts for the front splitter and dive planes, plus a picnic-table-sized rear wing. The body also received ducts at the rear to shoot cool air to the differential. A set of 15.4-inch carbon-ceramic brake rotors also brought things to a halt in a hurry. The company promised all the aero pieces were sculpted in the wind tunnel to give the coupe even more downforce. To shed weight, engineers chucked the radio, speakers, carpet and sound deadening out of the interior, and they replaced many bits with even more carbon fiber. All of the tweaks are necessary because the ACR moniker carries serious cachet for the Viper at the track, especially at the Nurburgring. One reportedly did a 7:22 lap around the 'Ring in 2008, and another improved that further to 7:12 in 2011. Autoblog reached out to FCA US for comment about the possibility for the hotter Viper, but the company wasn't willing to comment about any possible, future projects. Related Video:

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

Before Jay Leno, this 1970 Dodge Charger was a SEMA star

When Jay Leno drives an awesome car, enthusiasts take note, and this week the internet blew up over the 1970 Dodge Charger resto-mod that starred in a recent Garage episode. But you might not remember: this strapping Charger, called "Tantrum," was one of the highlights of the SEMA Show in Las Vegas last fall. Here's another look at a true Mopar monster. The power: Yep, Tantrum has 1,650 horsepower. That's more than two Hellcats worth of power under the hood. It's a twin-turbo 9.0-liter Mercury Racing engine with a quad-cam four-valve setup. Basically, it's a V8 boat motor developed for cars. Mercury Marine is the crew that developed the V8 for the 1990s Chevy Corvette ZR-1. That all-aluminum LT-5 under the hood cranked out 405 hp – an astronomical figure for the time – and helped make the ZR-1 an icon. Take a listen to Tantrum's 9.0-liter Mercury mill below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Who's behind all of this? SpeedKore, a Wisconsin-based performance shop that does one-off pro touring builds. It specializes in remaking Detroit muscle with modern features like carbon fiber, bespoke interiors, and powerful engines. SpeedKore is pretty good at it. Before it threw a Tantrum, it did the "Cudinator" used in some of the Fast and the Furious movies. You might not know: Tantrum won the Best Domestic category of the GT Awards at SEMA – chosen by your author. The sinister looks were the hook, and the crazy engine solidified its performance cred. Related Video: Image Credit: SpeedKore Design/Style Dodge Coupe Performance Videos Jay Lenos Garage 1970 dodge charger resto mod