1972 Dart Swinger Drag Car, Low 10's, Dodge, Mopar, 440 on 2040-cars

Auto blog

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

The 2018 Dodge Demon sounds like nothing else on the road

The Dodge Demon seems to have a torque problem, if making too much to easily contain can be considered a problem. In order to keep all that twist under control, the Demon has a new torque reserve launch system that works all sorts of engineering black magic to build boost without overloading the rear tires and brakes. That system, combined with the sticky Nittos and the fancy new suspension, should lead to some pretty spectacular 60-foot and 1/4-mile times. The way the system works is relatively straightforward. A bypass valve on the supercharger closes, "prefilling" the blower. In order to balance revs and torque, the computer can adjust fuel flow and spark on individual cylinders. The torque reserve kicks in when Launch Mode is initiated and the engine is turning at least 1,000 rpm. The goal is to reach peak boost quicker while efficiently putting down power. The side effect is a distinct exhaust note, which Dodge admits may make it seem like the Demon is broken. That seems to be the root of the "If you know, you know" tagline that the automaker has been using since the first teaser. Those interested can even download a ringtone, which might make it seem like you have a blown-out speaker on your phone. You can get a brief taste in the latest teaser video. In addition to the new info on the Launch Mode, Dodge released a couple of new teaser images. We briefly glimpsed one of these last week. It's a shot of the Demon's performance pages. The number 757 has appeared before, and all the talk of torque leads us to conclude that this is the Demon's torque output. The number 815 was seen in a separate teaser (shown below), which we feel may be the horsepower rating. If those numbers are correct, that would mean an increase of 108 horsepower and 107 lb-ft of torque, totally reasonable numbers given all the Demon's modifications. The license plate photo is another equation or code. This one, 3.9+221=405, is just as cryptic as the others. Look for more news and hints at ifyouknowyouknow.com in the weeks leading to the Demon's reveal. Related Video: Related Gallery Dodge Demon Teasers View 17 Photos Dodge Coupe Performance supercharger dodge demon dodge hellcat

Fiat Chrysler expands Takata airbag recall to 3.3M vehicles

Fiat Chrysler Automobiles is expanding its recall of vehicles equipped with Takata airbags, moving beyond Florida, Hawaii, Puerto Rico and the US Virgin Islands to the greater US, as well as Mexico, Canada and beyond. The affected vehicles, some 3.3 million in total, were built between 2004 and 2007, with many models, including the Dodge Ram 1500, 2500 and 3500, Durango and the Chrysler 300, having been affected by Chrysler's previous recall. Despite the somewhat alarming nature that comes with a recall of this many vehicles, it seems that Chrysler is moving more out of an abundance of caution (and federal pressure) than anything else, saying: "Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles." Owners of affected vehicles will be notified and asked to report to dealers for a free replacement driver's side airbag. Scroll down for the official press release from FCA. Statement: Global Air-Bag Inflator Replacement December 19, 2014 , Auburn Hills, Mich. - FCA US LLC will replace driver's-side air-bag inflators in an estimated 3.3 million older-model vehicles worldwide, in an expansion of an ongoing regional field action. Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles. Outside of Florida, one of the areas covered by the original action, no FCA US vehicle has been linked to an air-bag deployment of the type that has raised public concern. Nevertheless, the Company is replacing the Takata components tied to that concern. FCA US is aware of one related injury involving one of its vehicles, an older-model sedan. It occurred in a southern Florida region marked by persistent, high, absolute humidity – a condition believed to be a contributing factor in the air-bag deployments under investigation.