2003 Dodge Dakota 4x4 Quad Cab Sxt Under 100k on 2040-cars

Auto blog

Daily Driver: 2015 Dodge Charger SRT Hellcat

Daily Driver videos are micro-reviews of vehicles in the Autoblog press fleet, reviewed by the staffers who drive them every day. Today's Daily Driver features the 2015 Dodge Charger SRT Hellcat, reviewed by Greg Migliore. You can watch the video above or read a transcript below. Watch more Autoblog videos at /videos. VIDEO TRANSCRIPT: [00:00:00] Hey, everybody. It's Greg Migliore and today I am driving a 707-horsepower Dodge Charger. That can only mean one thing: I'm driving the Hellcat. Naturally, the spotlight feature of this car is the 6.2-liter supercharged Hemi V8. Makes 707 horsepower and 650 pound feet of torque. [00:00:30] Now naturally the engine sounds great and you can hear all of those horses going out the exhaust in back, which I think the Dodge guys have tuned really well. I think it's got one of the more unique sounds in the industry. All that horsepower will do that, but they've tuned it so there's a low kind of growl, and then it burbles and it's angry [00:01:00], it's visceral. I like it. It's intoxicating. It's different than other muscle cars. It's different than European exotics. I think it sounds great. I'm driving in sport right now which allows me to use the paddle shifters. I think it sounds a little better and the shifts of the eight-speed automatic transmission are a little bit more aggressive. For such a powerful car, Dodge did a nice job of tuning it to be actually pretty drivable. I just took a corner right there and the [00:01:30] steering offers you satisfying weight to your inputs. It's a little bit of a heavier steering, especially compared to some of the earlier generation Chargers. It's sporty, but it's not crazy. The design of the Dodge Charger is a critical element. That's why a lot of people buy this car, is it gives them that muscle car heritage look. The Hellcat has some special design cues that are also functional. You've got a couple of extra air intakes up front, keeps everything cool and breathing, the air flowing through; a nice spoiler in back [00:02:00] that helps keep the aero, and the downforce keeps you on the ground. The HID projector headlights really pop, especially at night, and in back you've got the LED taillights that spread out wide across the back end of this car like some of the great Chargers of the past. This car rolls on 20-inch black wheels with a spiderweb design. I think they look good. They're kind of low-key, which I think is great.

VLF Force 1 V10 is a rebodied Viper priced like a Lamborghini

It would appear that Henrik Fisker is done with hybrids. His latest project, called the Force 1, packs an oversized V10 engine with no electric assist in sight and all the environmental credentials of a herd of flatulent cattle. Alongside the Karma-based, Corvette-powered Destino, the Force 1 is the second product from VLF Automotive. Fisker has taken partnership in the new firm as chief designer alongside chairman Bob Lutz and CEO Gilbert Villarreal. The company isn't saying explicitly what the Force 1 is based on, but it doesn't take a CSI team to trace its roots back to the Dodge Viper. Never mind that it's being built in Auburn Hills – the same Detroit suburb where Chrysler is headquartered – or that it was jointly developed by Fisker and professional Viper racer and dealer Ben Keating. It also happens to be powered by an 8.4-liter V10, and there aren't many of those kicking around the industry. Instead of the Viper's 645 horsepower and 600 pound-feet of torque, the Force 1's ten-cylinder engine is optimized to deliver 745 hp and 638 lb-ft. That, according to VLF, is enough to send the coupe rocketing to 60 in 3.0 seconds flat, covering the quarter-mile in under 11 seconds on its way to a top speed of 218 miles per hour. The power is transmitted to the Pirelli PZero rubber through a six-speed manual, but VLF says it will fit it with an automatic at the customer's request. Around that massive engine and two-seat cockpit, Fisker designed a new shape that, for better or for worse, looks way more aggressive than the Viper's. The Force 1's proportions are tellingly super-snake, but the curves are replaced by some very angry-looking angles and vents. Its head- and taillights are ultra thin, and the deep-dish, split-four-spoke wheels seem to visually split the difference between the three-spoke wheels on the original Viper and the five-spoke alloys it wears today. If you doubted the Force 1's origins before, the interior ought to give it away, with its wide tunnel and familiar surfaces. Only VLF has refinished it in leather, suede, and Alcantara, all diamond stitched with contrasting thread to help position this as a more luxurious prospect than the Dodge. It even fit between the seatbacks place for two champagne bottles that we hope nobody would consider consuming before trying to handle that much power. Of course, none of this will come cheap.

Dodge Viper now available in matte finish

The prospect of buying a new Dodge Viper just got that much more enticing with the introduction of matte-finish paint direct from the factory. Available as part of the "1 of 1" customization program, the matte finishes aren't being offered in just a handful of colors like some other automakers do: customers will be able to specify a matte finish on any of the 8,000 colors that are already part of the program's palette. The matte finish option adds yet another step to the exhaustive hand-painting process that Dodge offers on the Viper - a painstaking endeavor that takes upwards of 145 man hours to complete. Specialists start by applying a base coat and a clear finish, followed by the paint and clear coat. The finished body panels are then smoothed with 1,000-grit paper and polished. A second sanding process is required for the matte finish before the application of a matte clear coat. Specify custom stripes (available in five colors or by custom order) and they're applied under the paint, not as decals on top. The availability of the matte finish in conjunction with the stripe options and new satin badging and fuel cap leads to over 50 million combinations. Needless to say, that means no two Vipers need ever leave the Conner Avenue assembly plant the same – though there will surely always be certain favorite combinations, especially on those units ordered from outside the customization program. Related Video: DODGE EXPANDS INDUSTRY-FIRST '1 OF 1' VIPER CUSTOMIZATION PROGRAM WITH NEW MATTE-FINISH PAINT OPTION - New matte-finish exterior paint available on all of Viper '1 of 1' program's 8,000 exterior color options and 24,000 stripe options - Viper's custom '1 of 1' exterior paint options double to 16,000 exterior colors and 48,000 unique strip combinations - Matte finish available in all exclusive '1 of 1' program and standard production colors - In addition to matte-finish exterior paint, Viper customers can choose between satin chrome or satin black badging and fuel filler door for a sinister appearance - Dodge Viper owners can build their one-of-a-kind Viper from more than 50 million unique build configurations for the ultimate in model year exclusivity June 19, 2015 , Auburn Hills, Mich. - The Dodge brand continues to expand the Viper's exclusive production elements like never before.