Find or Sell Used Cars, Trucks, and SUVs in USA

1990 Dodge Dakota Base Standard Cab Pickup 2-door 3.9l on 2040-cars

Year:1990 Mileage:184500 Color: Silver /
 Black
Location:

Chattanooga, Tennessee, United States

Chattanooga, Tennessee, United States
Advertising:
Transmission:Automatic
Body Type:Standard Cab Pickup
Engine:3.9L 3906CC 239Cu. In. V6 GAS OHV Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Owner
VIN: 1B7GL26XXLS756353 Year: 1990
Interior Color: Black
Make: Dodge
Number of Cylinders: 6
Model: Dakota
Trim: Base Standard Cab Pickup 2-Door
Drive Type: RWD
Safety Features: Anti-Lock Brakes
Mileage: 184,500
Power Options: Air Conditioning
Sub Model: SE
Exterior Color: Silver
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"This Truck Runs good body does have some dents not rusted out selling because it won't Pass Emissions Test here in my County I've put a $1000 Dollars into Truck dependable can drive it has I think 184500 Miles pretty close to it give or take a few miles.ive put a new Fuel Pump New Fuel Pressure Regulator New Fuel Injectors New Smog Pump New Egr Valve New Ecu New map sensor New idle control motor New Front Brakes New Distributor Parts New Spark Plug Wires and Spark Plugs Distributor Cap and oxygen Sensor and a few more Parts.Buyer responsible for Pick up Ac works may need Freon heater works and I have a Radio to install in Truck.Good Truck has alot of life left in it.Has a clear Title."

I accept Paypal payment should be made after Auction ends and Buyer is Responsible for Pick up.

Auto Services in Tennessee

Volunteer Diesel Service ★★★★★

Auto Repair & Service, Truck Service & Repair
Address: 145 Dobbins Pike, Portland
Phone: (615) 451-2843

Valvoline Instant Oil Change ★★★★★

Auto Repair & Service, Auto Oil & Lube, Automotive Tune Up Service
Address: Lenoir-City
Phone: (865) 988-5383

Triangle Muffler & Automotive ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Mufflers & Exhaust Systems
Address: 2803 Chattanooga Rd, Apison
Phone: (706) 673-4152

Tommy`s Complete Car Care Inc ★★★★★

Auto Repair & Service, Auto Transmission, Brake Repair
Address: 207 S Maple St, Lebanon
Phone: (615) 444-4200

Tire King ★★★★★

Auto Repair & Service, Engine Rebuilding & Exchange, Auto Transmission
Address: 5948 New Nashville Hwy, Smyrna
Phone: (615) 962-7644

The Glass Man ★★★★★

Automobile Parts & Supplies, Glass-Auto, Plate, Window, Etc, Automobile Accessories
Address: East-Ridge
Phone: (423) 475-5566

Auto blog

Cars.com runs 11-second quarter with Dodge Charger Hellcat

Mon, Jun 1 2015

The Dodge Charger SRT Hellcat and its Challenger sibling are two of the heroes of the modern performance world. With a headline-grabbing 707 horsepower from a supercharged 6.2-liter V8, their output even shames many supercars. But how quick can one really cover a quarter mile? Cars.com recently decided to find out by taking a Charger Hellcat to the drag strip to see if the sedan lived up to Dodge's 11-second claims. The results were quite impressive. After 13 quarter-mile runs of adjusting variables like the tire pressures and the car's various electronic aids, the Charger Hellcat managed a pass in 11.03 seconds at 126.61 mph – the pinnacle result of the day. This car was mechanically stock and wore the optional Pirelli P Zero tires. According to Cars.com, other quick sprints reached 11.09 seconds and 11.1 seconds, which even beat the site's 11.41-second best from a Challenger Hellcat last year. Getting the Hellcat's prodigious power down without losing traction was a challenge, even on the summer tires. Cars.com thought it had a run that could have dropped below 11 seconds, but then the wheels spun. Using the factory-recommended pressures, the Charger Hellcat was no still slouch with an 11.27-second time recorded, but taking things down to 25 psi proved the quickest at the strip. We already knew that the Charger Hellcat was a wonderful vehicle for eating up huge gulps of asphalt at high speeds and could verify its 204-mile-per-hour top speed (quite a bit faster, incidentally, than the Ferrari California T's 196 mph top-speed). Apparently, the 11-second quarter-mile claim is just as accurate. Also, for any curious owners, the Cars.com story divulges many of the tweaks required to reach this seriously quick time. Related Video:

Subaru Legacy pitted against Roadkill project cars

Fri, 05 Sep 2014

There's an evergreen debate among auto enthusiasts about whether they would prefer to have the latest and greatest car of today or a certified classic from yesteryear. What if you had to further define that, though, and the choice was between a brand new 2015 Subaru Legacy or a turbocharged Datsun 240Z with a hatch that wouldn't close? Roadkill aimed to find out that and more in one of its best videos to date.
According to the hosts, Subaru came to them, handed over some money and challenged Roadkill's project cars against its latest Legacy. The result is every bit as good (or better) than any automotive-themed show you could find on television.
Things start simple with a figure-eight race in a rodeo arena with the Subaru taking on Roadkill's 1968 Ford Ranchero, originally built for ice racing. From there the Legacy races a 1968 Dodge Charger with no windows around and off-road rally stage. Finally, the Subie goes head-to-head against the Rotsun, the aforementioned turbocharged 240Z, through an abandoned neighborhood. Plus, there's a bonus drag race challenging them all.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Sat, Jun 27 2015

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.