1972 Dodge Coronet Custom 4 Door Sedan Rare!!! on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

The 2018 Dodge Demon sounds like nothing else on the road

The Dodge Demon seems to have a torque problem, if making too much to easily contain can be considered a problem. In order to keep all that twist under control, the Demon has a new torque reserve launch system that works all sorts of engineering black magic to build boost without overloading the rear tires and brakes. That system, combined with the sticky Nittos and the fancy new suspension, should lead to some pretty spectacular 60-foot and 1/4-mile times. The way the system works is relatively straightforward. A bypass valve on the supercharger closes, "prefilling" the blower. In order to balance revs and torque, the computer can adjust fuel flow and spark on individual cylinders. The torque reserve kicks in when Launch Mode is initiated and the engine is turning at least 1,000 rpm. The goal is to reach peak boost quicker while efficiently putting down power. The side effect is a distinct exhaust note, which Dodge admits may make it seem like the Demon is broken. That seems to be the root of the "If you know, you know" tagline that the automaker has been using since the first teaser. Those interested can even download a ringtone, which might make it seem like you have a blown-out speaker on your phone. You can get a brief taste in the latest teaser video. In addition to the new info on the Launch Mode, Dodge released a couple of new teaser images. We briefly glimpsed one of these last week. It's a shot of the Demon's performance pages. The number 757 has appeared before, and all the talk of torque leads us to conclude that this is the Demon's torque output. The number 815 was seen in a separate teaser (shown below), which we feel may be the horsepower rating. If those numbers are correct, that would mean an increase of 108 horsepower and 107 lb-ft of torque, totally reasonable numbers given all the Demon's modifications. The license plate photo is another equation or code. This one, 3.9+221=405, is just as cryptic as the others. Look for more news and hints at ifyouknowyouknow.com in the weeks leading to the Demon's reveal. Related Video: Related Gallery Dodge Demon Teasers View 17 Photos Dodge Coupe Performance supercharger dodge demon dodge hellcat

Special Dodge Challengers get Hellcat bits to celebrate Mopar's 80th birthday

This year, Mopar is celebrating its 80th anniversary, and it's doing so in two-tone style with this very limited edition Dodge Challenger. Only 160 of these Challengers will be built, with 80 in each paint scheme. Buyers can choose between either Billet Silver or the slightly painful sounding Contusion Blue, each of which gets a hand-painted Pitch Black top half. These Challengers are based on the existing 392 Shaker package, but come with an array of upgrades and tweaks. In addition to the custom two-tone paint, the shaker scoop and rear spoiler are painted in the same color, rather than the usual matte black. The cars come with 20-inch wheels and hand-painted 392 logos on the fenders. The 392 cu. in., or 6.4-liter if you prefer, engine produces the same 485 horsepower and 475 lb-ft of torque as its normal counterpart. This Mopar Challenger will have more access to cold air, though, since it has both the shaker scoop and the headlamp intake from the Challenger Hellcat. At the back, there's also exhaust tips borrowed from the most hellish of Challengers. Or at least the most hellish, so far. View 14 Photos Inside, the changes are more minor. Performance seats are added with embroidered Mopar logos in the backrests. The seats and other trim also feature a silver-colored Tungsten stitching. Naturally, a serial number badge makes an appearance inside, too. Owners will also receive a little box of goodies including a booklet, signed rendering, keychain, additional badge, and a certificate showing the date of manufacture. The overall package is rather attractive, but it isn't cheap. To own one of the few Mopar Challengers, you'll have to fork over $56,885. That's a significant premium over the 392 Scat Pack Shaker, which starts at just $44,890 and makes just as much power. You'll also be able to get a 392 Scat Pack Shaker right away, while the Mopar special edition won't be out until spring. Plus, you may not get it until summer because the hand-painting process takes some time. Of course, for some people, the cost and the wait are worth the exclusivity. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.