2014 Dodge Charger R/t on 2040-cars

Auto blog

1968 Dodge Super Charger is a super Charger with a supercharger

Mopar's latest custom creation is sure to be in the running for coolest car at this year's SEMA show. It's a 1968 Dodge Charger, a car selected in part because this year marks the car's 50th anniversary, but taken to the extreme and renamed Super Charger. The headliner of the car's radical upgrades is the new "Hellephant" engine. It's a take on the original car's 426-cubic-inch Hemi V8. But this new engine, with the same displacement, is based on the current Hemi V8, and adds a supercharger. All told, it makes a whopping 1,000 horsepower and 950 pound-feet of torque on 93 octane pump gas. It will be available as a crate engine, too. The engine is far from the only impressive change to the car. All over the body are mild to wild tweaks. The wide, uninterrupted grille from the original is still here, but it's a one-piece example now. And instead of hiding the headlights behind doors that have to open for illumination, the lights simply shine through the grille, retaining a clean look even at night. The whole car sits 2.5 inches lower than stock, and it's now four inches wider thanks to the huge fender flares. They house 305-mm-wide tires up front, and 315-mm tires in the rear. Likely the most complicated change to the car is the lengthened wheelbase. There are two more inches between the wheels now, something Mopar did to reduce the front overhang. A close second in complexity are the taillights. They're the same shape as the originals, but now the round elements are actually exhaust outlets. The tips also happen to be the same as those on the Alfa Romeo Stelvio. There are other details that help bring together the exterior. The rain rails have been smoothed out on the roof, the vent windows removed, special 426 stickers have been added, and the fuel door now has a Hellephant badge with a blue background with lots of little Mopar Ms. The interior gets some attention, too. The rear seat has been removed, Dodge Demon style. It gets a custom roll bar designed to be as unobtrusive as possible, even getting the hoop around the seats to roughly line up with where the windows meet. Gauges come from the Mopar catalog, and the steering wheel and seats are from the dearly departed Dodge Viper. They're particularly relevant, as the six-speed manual transmission comes from the Viper, too. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Dodge launches 1 of 1 Viper configurator

Get comfortable because you might be spending a good chunk of time in front of the computer on this. The configurator for the 2015 Dodge Viper GTC 1 of 1 is now online, and it's a ton of fun to play around with. Mechanically, the GTC is just like every current Viper with a 645-horsepower, 8.4-liter V10. But for the special editions Dodge lets buyers tinker with practically everything aesthetic thing. For the exterior alone, the choices include some 8,000 available body colors, two stripe styles in innumerable shades, two hood designs and various brake caliper hues. Plus, there are 16 upholstery colors inside, and options like red seat belts and carbon fiber trim. Dodge reckons there are over 25 million possible combinations, and the models are available to customers on a first-come-first serve basis for each model year. Although, two people wanting identical cars seems pretty unlikely. The configurator is a beauty too. It makes all of these myriad options extremely easy to pick from, and there are even four resolution settings to see your creation in the best possible way. Prices for the GTC start at $94,995 and deliveries are set to start in the second quarter of the year. Although, even if you have no intention of buying one, specifying these custom coupes is still highly entertaining.

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.