Find or Sell Used Cars, Trucks, and SUVs in USA

2008 Dodge Charger Sxt Sedan 4-door 3.5l on 2040-cars

US $10,000.00
Year:2008 Mileage:110960 Color: panels and interior area to show the exceptional condition of the car
Location:

Shavertown, Pennsylvania, United States

Shavertown, Pennsylvania, United States
Advertising:

Just to reiterate, only 1 owner, and as mentioned above, this car has been taken care of both inside and out. 

Paint and body are in great shape.  I took pictures of all exterior panels and interior area to show the exceptional condition of the car.

Upgraded Stereo to SONY Bluetooth System and new high output speakers were installed.

Front Bumper/Grill was changed from open grill to honeycomb grill and added the SXT Symbol to it.

Rear Spoiler in Matt Black was also added.

Cat-Back Flowmaster Duel Exhaust System was added which increases engine output and gives a "Throaty" sound during acceleration.



Auto Services in Pennsylvania

Zuk Service Station ★★★★★

Auto Repair & Service, Gas Stations, Convenience Stores
Address: 1200 Washington Ave, Glenshaw
Phone: (412) 276-6244

york transmissions & auto center ★★★★★

Auto Repair & Service, Automotive Tune Up Service, Automotive Alternators & Generators
Address: 850 carlisle rd, Seven-Valleys
Phone: (717) 650-1900

Wyoming Valley Motors Volkswagen ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: Nanticoke
Phone: (570) 288-7411

Workman Auto Inc ★★★★★

Used Car Dealers
Address: 310 W College Ave, Coburn
Phone: (814) 359-2000

Wells Auto Wreckers ★★★★★

Automobile Parts & Supplies, Automobile Accessories, Automobile Parts & Supplies-Used & Rebuilt-Wholesale & Manufacturers
Address: 4510 Route 322, Luthersburg
Phone: (814) 653-8303

Weeping Willow Garage ★★★★★

Auto Repair & Service, Brake Repair, Tire Changing Equipment
Address: 224 State Route 31 N, Pen-Argyl
Phone: (908) 689-7471

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Sat, Jun 27 2015

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Lackluster Dodge Dart sales trigger layoffs

Thu, 06 Mar 2014

Hidden amidst the overall very positive sales figures that Chrysler released earlier this week were a few disappointments, the biggest of which may be the Dodge Dart. While Dodge sales in general were down 11 percent from a year ago, the Dart's poor figures stood out from the rest - with 4,888 units sold, the Dart was down 37 percent in February.
It comes as little surprise, then, that the automaker has announced layoffs at its assembly plant in Belvidere, IL. According to The Daily Herald, Dodge will temporarily lay off 325 workers "to balance vehicle supply with current sales demand." Put more simply, there are more Darts than buyers at the moment...
We don't think the Dodge Dart is a bad car, but it's playing in a market that offers a few standout sellers, like the Chevy Cruze, Ford Focus, Honda Civic and Toyota Corolla. According to AutoPacific analyst Dave Sullivan, as quoted by The Daily Herald, "great incentives on the Dodge Avenger" are also partly to blame for the Dart's poor showing.

New Viper 'is a possibility,' Sergio Marchionne says

Wed, Jan 13 2016

It was thought the door to the future for the Dodge Viper had closed last year, but Fiat Chrysler CEO Sergio Marchionne reopened it during his press conference at the 2016 Detroit Auto Show. Marchionne said the current Viper is the only FCA product to use the ZD platform, which "doesn't make sense to me." Yet, "given the architectural development within the brand, there is a possibility that a new version of the Viper may surface." Automobile reports that the company uses a versatile, rear- and all-wheel drive Giorgio platform for Alfa Romeo and Dodge. It will support the Alfa Romeo Giulia (Alfa Romeo's larger BMW 5 Series competitor), the next-generation Dodge Challenger, Charger, and rumored Barracuda, and it could support a new generation of Viper. We're probably talking about a different kind of Viper, though, with Automobile saying, "the current car's truck-based V-10 no doubt would be scrapped along with its platform." A Viper without a V10 doesn't seem like a Viper to us, but we'll wait to see what happens. In the midst of contract negotiations for a new labor agreement between FCA and the United Auto Workers last year, it emerged that the Conner Avenue Assembly plant that builds the Viper hadn't been given any new product after the end of Viper build-out in 2017. That led most to reason that the current Viper would be the end of the 25-year run of America's hairiest sports car. How long we'll be waiting is unknown. Marchionne had no timetable and admitted that a future Viper might not appear on the heels of the current one. With a renewed commitment to being debt-free by 2018, FCA is likely more focused on getting Alfa Romeo running properly and cranking out the volume variants for the Giorgio platform first. Related Video: Featured Gallery 2014 SRT Viper GTS: Review View 36 Photos News Source: Automobile via World Car FansImage Credit: Copyright 2015 Drew Phillips / AOL Detroit Auto Show Dodge Coupe Performance Sergio Marchionne FCA conner avenue assembly plant