1971 Dodge Charger R/t on 2040-cars

Auto blog

2016 Dodge Viper ACR First Drive [w/video]

The Dodge Viper is not a comfortable car. Livable, yes. The interior is covered in fine materials. But you still climb over a hot door sill to enter the tiny cabin. And the frequency range of the engine's noises seem specifically designed to cause headaches. What happens, then, if you remove all pretense of civility from a Viper and add equipment solely aimed at improving lap times? You would have the 2016 Dodge Viper ACR. In terms of achieving its purpose, this car is a absolute success. In many ways it's also the most honest Viper of the current generation. Prices start at $121,990 (including $2,100 gas-guzzler tax and $1,995 destination), or $32,900 more than the least expensive Viper. In ACR trim, the Viper loses the under-carpet padding, 9 of 12 speakers plus amplifier, carpet and trim from the cargo area, and sound deadening in front of the rear wheel wells. The parts of the interior still covered add healthy amounts of Alcantara or optional carbon fiber. That weight loss is compensated by the addition of go-fast bits like the giant rear wing (or the larger "x-wing" on the Extreme Aero Package), 10-way adjustable Bilstein Motorsports shocks, Brembo carbon-ceramic brakes, a rear diffuser, and a front splitter. Total claimed curb weight is 3,392 pounds in Aero trim (standard ACR trim is 18 pounds lighter), which is within a few stone of the rest of the Viper lineup. The diffuser strakes and leading edge of the splitter are removable, made to be replaced after rubbing on track tarmac and make street driving slightly more practical. Not that you'd want to drive the ACR on the street, with the lack of noise insulation and spring rates twice as stiff as the Viper TA, but it is street-legal. Dodge claims the DOT-approved Kumho Ecsta V720 tires on the ACR allow faster lap times than some race compound tires. Our test was limited to on-track shenanigans at Virginia International Raceway. Which is fitting because we wouldn't have anything good to say about driving the car on the street. The ACR is, essentially, a race car sold in the showroom, although with the Viper's 1 of 1 customization program, your custom build can include as many creature comforts as you like. Lined up in pit lane at VIR, the Viper ACRs for our evaluation blur the air with heat shimmer. All of the test cars have air conditioning, but that shuts off at full throttle with a six-second reset.

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

Dodge Hellcat orders on hold due to 'unprecedented demand'

Want to get your hands on a 707-horsepower Dodge Challenger or Charger Hellcat to call your very own? We don't blame you, and you're not alone. According to Motor Authority and confirmed by a spokesperson from Chrysler, Dodge has gotten so many orders for its stable of Hellcats that it simply cannot keep up with demand: "Due to unprecedented demand for the 2015 Dodge Charger and Challenger SRT Hellcats, we are temporarily restricting orders while we validate current orders that are in the system." Put another way, if you're waiting for a Hellcat, your wait is likely to be a lot longer than you'd like. We've reached out to Chrysler to find out how long it might take for a new customer to get a new Hellcat, and we'll update if and when we hear back. Related Video: Featured Gallery 2015 Dodge Challenger SRT Hellcat View 88 Photos News Source: Motor Authority Chrysler Dodge Car Buying Ownership Coupe Performance Sedan dodge hellcat dodge challenger hellcat dodge charger hellcat autoblog black