1970 Dodge Charger on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Special Dodge Challengers get Hellcat bits to celebrate Mopar's 80th birthday

This year, Mopar is celebrating its 80th anniversary, and it's doing so in two-tone style with this very limited edition Dodge Challenger. Only 160 of these Challengers will be built, with 80 in each paint scheme. Buyers can choose between either Billet Silver or the slightly painful sounding Contusion Blue, each of which gets a hand-painted Pitch Black top half. These Challengers are based on the existing 392 Shaker package, but come with an array of upgrades and tweaks. In addition to the custom two-tone paint, the shaker scoop and rear spoiler are painted in the same color, rather than the usual matte black. The cars come with 20-inch wheels and hand-painted 392 logos on the fenders. The 392 cu. in., or 6.4-liter if you prefer, engine produces the same 485 horsepower and 475 lb-ft of torque as its normal counterpart. This Mopar Challenger will have more access to cold air, though, since it has both the shaker scoop and the headlamp intake from the Challenger Hellcat. At the back, there's also exhaust tips borrowed from the most hellish of Challengers. Or at least the most hellish, so far. View 14 Photos Inside, the changes are more minor. Performance seats are added with embroidered Mopar logos in the backrests. The seats and other trim also feature a silver-colored Tungsten stitching. Naturally, a serial number badge makes an appearance inside, too. Owners will also receive a little box of goodies including a booklet, signed rendering, keychain, additional badge, and a certificate showing the date of manufacture. The overall package is rather attractive, but it isn't cheap. To own one of the few Mopar Challengers, you'll have to fork over $56,885. That's a significant premium over the 392 Scat Pack Shaker, which starts at just $44,890 and makes just as much power. You'll also be able to get a 392 Scat Pack Shaker right away, while the Mopar special edition won't be out until spring. Plus, you may not get it until summer because the hand-painting process takes some time. Of course, for some people, the cost and the wait are worth the exclusivity. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Hypermiling a Ram 1500 EcoDiesel to 38.1 mpg

You never quite know what Wayne Gerdes has up his sleeve. The man who coined the term hypermiling is always looking for adventurous ways to prove that anyone – even you... yes, you – can eke out more miles per gallon just by changing the way you drive. Saying that is easy. Proving it by going on outlandish cross-country drives is hard. But for Gerdes and his team of fuel economy fiends over at CleanMPG, hard is half the fun. Our latest adventure appeared, at first glance, to be nearly impossible. Which is why we always answer the phone when Gerdes calls. He likes to take journalists along on his drives, not only to try teach us how to hypermile but also to prove that we can be taught. The first time I 'helped' him and his team was when we got over 30 miles per gallon in a 2011 Ford F-150 XLT with the EcoBoost 3.5-liter V6. The EPA rated that truck with at just 16 mpg in the city and 22 on the highway. So, we'll count that trip as a success. Next up was a cross-country drive last fall in a trio of Audi TDI vehicles to prove that you don't need to drive extra slow to beat the EPA numbers. In fact, we made it from Los Angeles to New York City in just over 46 hours, cramped but not cranky. We had once again proven that how you drive is hugely important to your fuel usage. Our latest adventure appeared, at first glance, to be nearly impossible. The EPA says that the Ram 1500 EcoDiesel we would be driving gets just 22 combined mpg (19 city and 27 highway). Gerdes' idea was to drive it as far north from Houston, TX towards Detroit, MI as we could go on one tank. The day before we left, our itinerary got an extra stop. Instead of taking one of the official Shell Eco-marathon prototype vehicles to Detroit, it was decided to bring the winning diesel-powered prototype from the just-finished event to The Henry Ford Museum, where it had been arranged the car would be displayed. The winning car was built by a small team (just four students) from Sullivan High School in Sullivan, IN, who managed to beat a number of college teams with a score of 1,899.32 mpg. That target would be a bit out of reach for the Ram, but could we get 1,000 miles from the tank? Since the truck has a 26 gallon tank (officially, anyway), that would mean the EPA says we could only go 702 miles, assuming all highway driving. Could we make up 300 miles with careful driving? That spells both challenge and fun.