1968 Dodge Charger General Lee 4x4 Mud Bogg Mud Racer on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Chrysler readying Hellcat V8 with Viper-like power

A monstrous supercharged V8 engine could be in store for Chrysler and SRT products, if recent rumors are to be believed. Allpar is reporting that the forced-induction V8 - Chrysler's first, if this goes down - could make its debut this summer.
The story goes that the Hellcat would be based on a 6.2-liter Hemi engine, rather than on the existing 5.7- or 6.4-liter versions of the company's vaunted mill. In any case, the general consensus is that the motor will have gobs of power. Modest estimates call for between 500 to 570 horsepower, with some outliers predicting a figure as high as 600 hp. That figure would put the output would place the Hellcat awfully close to that of the 640-hp V10 in the SRT Viper, too. Allpar contends that a slightly lower powered version would allow Chrysler to keep costs below that of the more powerful Ford Shelby GT500, which might be a sweet spot.
The Hellcat could debut in a number of SRT products. SRT versions of the Charger, Challenger and 300 are all up for grabs, as is the rumored SRT Barracuda.

Buyer says Dodge dealer gave him wrong Charger, failed to notice for 2 months

Mistakes happen, and they happen all the time. But when that mistake means a customer doesn't get what he or she paid for, something's gotta give. That's what one Dodge Charger buyer claims he is trying to sort out with his local dealership. Two months after taking delivery, the owner (going by the user name Dakrbouncer4689 on Reddit) says he got a call from his local Dodge dealership reporting a little problem. He had ordered and paid for the Charger SXT (pictured above on the dealer lot), but was given a Charger SE instead. The SE being the lower trim level, this presented one set of problems – namely a $2,000 discrepancy in equipment, like a five-speed automatic versus an eight-speed, a 4.3-inch infotainment display instead of 8.4, heated seats, leather steering wheel, premium audio, remote starter and so on. The second set of issues is that the VIN number on the paperwork (including the registration and insurance papers) of course doesn't match that of the car itself. The dealer, having obviously made a rather large mistake, apparently called the owner in to sort out the mess, but according to the customer's account, things didn't go as smoothly. Instead of immediately working to address the problem, the salesman kept the owner waiting, acted like it was no big deal, and offered only to swap the cars with no compensation for the trouble. Fortunately, the manager proved more sympathetic and apologetic, and offered the customer three options: he could swap the cars (re-doing the tinted windows on the SXT that the customer had done on the SE and throwing in leather seats for free), he could keep the SE (with the dealership handling the paperwork, throwing in the leather seats, adjusting the price and refunding an extra $400), or they could cancel everything, return the car and part company. As we go to press, the Charger owner had yet to make (or at least share) his decision. But while the principle of caveat emptor makes us wonder how he managed to take home a different car from the one he paid for, clearly the salesman and the dealership made a pretty large mistake by presenting him with the wrong set of keys and letting him off the lot without double checking it all. News Source: Darkbouncer4689 via Reddit, World Car Fans Dodge Car Buying Car Dealers Economy Cars Sedan