on 2040-cars

Auto blog

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.

2016 Dodge Viper ACR racks up lap records

With 645 horsepower and an adjustable spoiler nearly six feet wide, the 2016 Dodge Viper ACR would look at home on the runways of most any airport, air base, or aircraft carrier in the world. But it's not built for the runway. It's built for the race track. And it has positively mastered them one after another. In fact, the new Viper ACR has not only beat the lap times of its own predecessor as it set out to, but took the production-car lap record at 13 tracks across the country. The endeavor started out at the Inde Motorsport Ranch in Arizona, where development engineer Chris "The Wolf" Winkler set a lap time of 1:33.75 on the Configuration 4 track to beat every other street-legal vehicle to ever lap the circuit. Then it was off to Buttonwillow, the MotorSport Ranch (in Cresson, TX), Big Willow, VIR, Grattan, Pittsburg, GingerMan, the Motown Mile, Nelson Ledges, Waterford Hills, and Road Atlanta. And with the new American Club Racer, Dodge took the lap record at each and every one. The journey culminated just days ago at Laguna Seca, where track expert Randy Pobst climbed into the Viper ACR and set a lap time of 1:28.65. That's 5.27 seconds faster than the previous ACR's time, and 1.24 seconds faster than the Porsche 918 Spyder that held the record until now. The sum total is a bragging-rights sheet of lap records set at 13 tracks across these United States. And you don't have to take Dodge's word on that. The records have been certified by the Sports Car Club of America (SCCA), cementing the ACR's place in the record books. Nice work if you can get it, and you can scope it out in the video above and press release below. Related Video: 2016 Dodge Viper ACR Is Undisputed Track Record King - Ultimate street-legal race car sets new high-performance benchmark with more track records than any production car in the world - Sports Car Club of America (SCCA) has certified lap records at 13 road courses, including world-famous Laguna Seca, Road Atlanta and Virginia International Raceway - With 645 horsepower and more torque than any naturally aspirated engine in a production car, the ACR is purpose built for weekend club racers who want the most extreme, but street-legal, track car available - Significant aerodynamic and suspension upgrades, new Carbon Ceramic brakes with six-piston calipers from Brembo and high-performance Kumho tires, specifically designed for the new 2016 ACR, set this Viper apart on any road course November 3, 2015, Auburn Hills, Mich.