2023 Dodge Challenger R/t on 2040-cars

Auto blog

2015 Dodge Charger R/T Scat Pack Quick Spin

"Scat Pack" is plucked from The Big Book of Dodge Nameplates to describe what is basically the average of the Charger R/T and Charger SRT 392. Unnecessary horsepower always seems to go down better with a dose of heritage. If you think it's a silly name, just be thankful Dodge didn't call it an S/RT or an R/T-S. In previous years, a similar formulation was known as the SRT8 Super Bee. Going by another name, it's still as sweet and wears the same hurried-looking pollinator on the grille. We do wonder: What has displeased him so, and why does he have wings and wheels? The packaging is at least fresh. All Chargers get updates for 2015, including improved interiors and a Dart-on-steroids exterior redo. The new lines work especially well on the more aggressive models, including this Scat Pack car. Like the Super Bee before it, the Scat Pack gets the 6.4-liter engine from SRT 392; for 2015 it gets a slight output boost to 485 horsepower and 475 pound-feet of torque, respective increases of 15 and 5. It does without the SRT three-mode suspension and comes with cloth seats (leather is an option) to keep the price down. The Scat Pack also has slightly smaller Brembo front brakes, narrower wheels, and different rubber. It does, however, cost eight grand less and is just as quick in a straight line. Intriguing. Driving Notes Scat Pack cars get an electronically controlled active exhaust that we'd call hyperactive. It's loud all the time, opening its widest at startup, idle, and when you ask for any appreciable amount of power. Sport mode supposedly makes a difference, but we couldn't discern loud from louder. It's a delicious and appropriate loudness, with a brassy trumpet tone to it, and the engine makes top-fuel noises at full tilt. The squeal of the rear tires can be heard from every stoplight no matter the road conditions. A light touch avoids leaving a mark if you're so inclined. We weren't. When the tires eventually smear into the realm of traction, this thing is pretty quick – hitting 60 miles per hour takes 4.5 seconds. There's also an adjustable launch control mode if you want to cut out some of the wheelspin. The eight-speed transmission shifts smoothly. Quicker, more-palpable shifts are had in Sport mode, but occasionally the transmission still needs a moment to drop down from seventh or eighth when you mash the throttle. Despite its two overdrive gears, this Charger is still loud on the highway. In a good way. Probably.

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.

Equus Bass 770 | Autoblog Minute

Equus Automotive combines a Ford Mustang and a Dodge Challenger into one. Dodge Ford Luxury Autoblog Minute Videos Original Video 5g Connectivity Detroit supercar transportation mobility challenger luxury vehicle