2016 Dodge Challenger Srt Hellcat Coupe 2-door on 2040-cars
Solvang, California, United States
I am always available by mail at: vernellvcchappan@mancityfans.com .
This is a Very Nice Plum Crazy Pearl Hellcat with the Satin Black Hood. I have put the
FORGELINE GA1R wheels on it. They retail for $1540 each. I also Upgraded the Car with the 3.09 Ratio Differential.
That cost $1340 plus Labor. The car drives so much better. This should be standard.
The front of the car and the windshield are almost mint. I always try to drive in clean air when I am driving on
the freeway etc. There are some chips down low behind the wheel wells where the tires throw up small stones and
sand. The hood is mint. I sealed it with Dr Beasley's sealant and detail and clean it with their products.
Car has the Black Laguna Leather Interior. The Interior has no issues that I can tell. I am careful not to scuff
the door panel and sill plate so they should be near mint. Standard Navigation and rear camera etc...I don't think
I have ever even had a passenger in the car.
The front splitter is original and has never rubbed on anything. I am especially proud of that.
Front Wheels are 20X8.5 with 245/45R20 Continental Extreme Contact DW Tires, the rear Wheel is a 18X10.5 with
305/45R18 Nitto NT555R Tires. All wheels and tires are near mint/new. TPMS are installed and function correctly.
The wheels and tires cost about $7200 total. Each front wheel and tire are 14 pounds lighter than stock, and the
rear, even though they are much larger are 6 pounds lighter than stock each.
Please note the car is pictured with a different back tire. The current Nittos are a 1" taller so they match the
height of the front and look much better and they will last quite a bit longer, depending on how you drive.
This car is a garage queen. It sometimes sits for 2 or three weeks at a time. I bought it in Temple Texas so it had
the first 1425 miles put on it just getting it home. It has never been driven in rain. Not even on the trip back
from Texas. Was built in Nov 2015 and purchased as soon as it arrived at the Dealer since I placed my deposit when
the car was in transit from the factory.
The Oil and Filter were expertly changed at 6 month intervals and recorded in the owners manual. I cut the latest
oil filter apart and it was flawlessly clean inside.
Dodge Challenger for Sale
1970 dodge challenger rt/se(US $19,000.00)
1970 dodge challenger r/t(US $24,000.00)
2013 dodge challenger srt8 392(US $12,000.00)
2015 dodge challenger --(US $15,500.00)
1970 dodge challenger r/t 6 pack convertible(US $27,222.00)
2009 dodge challenger(US $10,800.00)
Auto Services in California
Windshield Repair Pro ★★★★★
Willow Springs Co. ★★★★★
Williams Glass ★★★★★
Wild Rose Motors Ltd. ★★★★★
Wheatland Smog & Repair ★★★★★
West Valley Smog ★★★★★
Auto blog
Over 1,000 Ram pickups lap Nurburgring in world record parade
Tue, Nov 8 2016How many Ram trucks would you think you'd see in one place anywhere outside the US? If you by any chance happened to be at the Nurburgring Nordschleife track in Germany the past weekend, you would have seen a great deal of them, as Ram enthusiasts grouped together to set a Guinness World Record. The record called for as many pick-up trucks as possible to form a parade, with the previous, Mexican-set record having consisted of 638 trucks; the earlier Ram-specific record featured 451 trucks. On November 5th, as many as 1,152 Ram trucks gathered at the 'Ring, and of course a lap of the Nordschleife track was the place for the actual parade. This video, which is more than a half-hour, shows the multitude of Rams slowly lapping the track, with flags waving in the cold November air. Honking horns was strictly prohibited, and the Rams did not off-road through the Adenauer Forst S-bend's grass. This is also one of the rare Nurburgring videos where no-one crashes into the railings at great speed. The parade was arranged by a vehicle trading company called AutoGlobalTrade, which originally aimed for 1,317 trucks to arrive at the Nurburgring, but the official number is still something to be proud of. The majority of the trucks were German, with some Rams having arrived from neighboring countries. Related Video: News Source: RamWorldRecord via PistonHeadsImage Credit: EMS Nordschleife TV Weird Car News Dodge RAM Truck Videos
Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats
Tue, Nov 1 2016When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.
Brits recreate iconic Bullitt chase scene
Tue, 13 May 2014Recreating the famous chase scene from Bullitt has become almost an art form in its own right. We've seen it done in a music video, with scale models and even in commercials. There are few films that are as defined by a single scene as the 1968 classic. Even if you don't know a single beat of the plot, the Highland Green Ford Mustang racing a Dodge Charger through the hilly streets of San Francisco is famous. It's so well known that the Silverstone Classic has created a homage to promote its celebration of the 50th Anniversary of the Mustang at this year's event in July.
Filmed around the famous UK circuit, the short film generally gets the key points of the scene right. It even has a green Volkswagen Beetle that keeps reappearing, as in the movie. Unfortunately, its Steve McQueen stand-in looks a little too old for the role. While the video shortens the chase considerably, it's still great to see these '60s behemoths leaning and sliding around the track. Scroll down for a touch of nostalgia thanks to one of the greatest scenes ever in cinema - we've got both the recreation and the original chase seen from the movie waiting for you.