2013 Dodge Challenger Sxt Plus V6 Htd Leather 20's 1k Texas Direct Auto on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

SRT reveals Satin Vapor Edition 300, Charger and Challenger SRT models

With the exception of some notable truck and van introductions, Chrysler brands have tended to use the Chicago Auto Show to bring out new special editions, pimp their aftermarket parts support or indulge in the occasional flight of fancy. That plan is holding true for 2014, as well. Cases in point are these new Satin Vapor Editions of the 2014-model-year Dodge Challenger, Dodge Charger and Chrysler 300 - all from SRT.
The Satin Vapor name may sound like a failed 1970s glam-rock band, or a pseudo-gynecological diagnosis from the Old West, but is, in fact, pretty much a tape-and-trim package for this trio of hi-po Mopars. 300, Challenger and Charger alike come shod with 20-inch aluminum wheels finished in Black Satin Vapor Chrome, and are accented with Satin Black bits aplenty. The 300 gets blacked-out mirrors, spoiler and roof; the Challenger applies it to mirrors and its fuel door; while the Charger has the stuff covering its roof, hood and Super Bee tail graphic.
Interiors of the cars have been mildly updated as well, with all three getting some combination of Nappa leather, ultra-suede and carbon-fiberish finishes.

Dodge Journey recalled for freezing fluid lines

The Basics: FCA is recalling 10,944 examples of the 2009-16 Dodge Journey - specifically those equipped with the optional engine block heaters and located in extremely cold climates. The Problem: Power steering fluid lines may leak when starting the engine in extremely cold weather, which would increase the amount of effort required to steer the vehicle. Injuries/Deaths: FCA reports that it is "unaware of any related injuries or accidents." The fix: The manufacturer is working on expediting replacement parts to resolve the issue in those vehicles potentially affected. If you own one: Expect to hear from the manufacturer soon to arrange service. Your chances of being affected are higher if you live in Canada, where a far greater number – estimated at 187,436 – of Journeys may be affected. Related Video: STATEMENT: FLUID LINE May 6, 2016 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 10,944 U.S.-market midsize crossover vehicles equipped with optional block heaters to address fluid-line durability in extreme, cold-weather conditions. An investigation found some lines carrying power-steering fluid may leak at engine start-up, when the vehicle is subject to extreme cold. Steering is not lost in such circumstances. However, if a vehicle is so-affected, the amount of physical effort required to steer may increase. The Company is unaware of any related injuries or accidents. Affected are certain model-year 2009-2016 Dodge Journey vehicles. An estimated 187,436 vehicles in Canada are also subject to this recall. Replacement parts are expected to become available soon. Affected customers will be notified accordingly. FCA US urges customers to follow the instructions on all recall notices. Customers with questions may call the FCA US Customer Care Center at 1-800-853-1403. Featured Gallery 2014 Dodge Journey Crossroad View 19 Photos News Source: FCA Recalls Dodge Crossover Minivan/Van dodge journey