2013 Dodge Challenger Sxt on 2040-cars

Auto blog

The Dodge Challenger 1320 is rarer than the vaunted Demon

Dodge stopped making the 840-horsepower Challenger Demon after the 2018 model year, and it filled the gap the coupe left in its range with a slightly tamer variant called 1320. While it wasn't a limited-edition model, production figures released recently cement its status as a future classic. 1320 references the length of a drag strip, which normally checks in at 1,320 feet, and the name speaks volumes: It was built to go flat-out for a quarter mile. It offered all of the go-fast goodies found in the Demon, including a transbrake, a line lock, an SRT-tuned suspension, plus bigger brakes provided by Brembo, and it swapped the supercharged V8 for a naturally-aspirated, 6.4-liter eight shared with the Challenger 392 and tuned to 485 horsepower. It wasn't quite as quick as the Demon, but it remained a race car barely street-legal enough to put plates on, so it occupied a shallow niche. Dodge made 1,054 examples of the 1320 during the 2019 model year, according to Mopar Insiders. Of those, 1,026 units were sold in the United States, and the remaining 28 stayed in their home country of Canada. As for colors, 232 enthusiasts chose Pitch Black, making it the most popular. At the other end of the spectrum, 13 buyers ordered Maximum Steel, which is the rarest color offered to the public. One 1320 was painted in Yellow Jacket, and another in Billet, but they were pre-production cars. To add context, the firm capped Demon production at 3,300 units, including 300 for the Canadian market. The 1320 is returning for the 2020 model year, so it might ultimately become more common than the Demon, but it remains a rare edition that will turn heads at high-profile classic car auctions in a few decades' time. If you've got one, race it, but pamper it off the track, and hang on to it. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

FCA's shifter fiasco proves novel gear selectors are a bad idea

What's wrong with PRNDL? Why are automakers trying to overly complicate the simple task of selecting gears? If there's any lesson to learn from the recent news that NHTSA is investigating 853,000 Fiat Chrysler vehicles over its problematic gear selectors, it's that the trend of fancy shifters needs to stop. Now. Last year, NHTSA opened an investigation into Jeep Grand Cherokee models, and has now expanded this probe to include the 2012-14 Chrysler 300 and Dodge Charger. The problem? The shifter – assembled by ZF – is confusing for many drivers. "Testing ... indicates that operation of the (electronic) shifter is not intuitive and provides poor tactile and visual feedback to the driver, increasing the potential for unintended gear selection," a NHTSA document states. More than 100 crashes and over a dozen injuries are linked to this problem, according to The Detroit Free Press. To us, the problem isn't just limited to FCA. These unnecessarily novel gear selectors are spreading like wildfire across the industry. Honda and Acura use a weird pushbutton setup. Lincolns have buttons on the dashboard. Jaguar's shifter electronically raises out of the center console. Mercedes uses a stalk with up-for-Reverse, down-for-Drive, push-for-Neutral arrangement. And what the hell is BMW thinking with its M cars? FCA has since abandoned the confusing shifters in question. The 300, Charger, and Grand Cherokee now use the rotary shift dial that's quickly proliferating across the company's brands. Simplistic gear selectors might not be sexy, but no one ever complained about not being able to find the right gear in a Hyundai Sonata. What's most interesting is that this NHTSA investigation could push FCA – and possibly other automakers – to redesign vehicle functions that otherwise operate as designed. Just because most people will never have a problem putting a Dodge Charger in Reverse doesn't mean there isn't a flaw with the design. But perhaps a more simplistic solution – good ol' PRNDL – would have prevented these issues from the start. Related Video: News Source: The Detroit Free PressImage Credit: Copyright 2016 AOL Government/Legal Chrysler Dodge Jeep FCA shifters