2013 Challenger Sxt 3.6 V6 All Power 30k Warranty 1 Owner on 2040-cars

Auto blog

Dodge engineers trying to shoehorn Pentastar into Dart?

The fact that the Dart's launch has been a pretty dismal affair isn't what we'd call secret. Judging by its mounting inventories and poor critical reception, Dodge's successor to its unloved Caliber has struggled since it hit the market. And while both of those are difficult problems to address, at least their cause is well known - the powertrain.
Even Fiat-Chrysler CEO Sergio Marchionne has acknowledged that the powertrain options in the Dart are substandard, admitting at January's Detroit Auto Show that the powertrains are "less than ideal." Leading with the 1.4-liter turbocharged four-cylinder found in the Fiat 500 Abarth left a bad taste in the mouths of consumers thanks to the laggy engine and dead throttle response (to say nothing of the manual and dual-clutch gearboxes that needed more refinement). The addition of the 184-horsepower 2.4-liter Tigershark in the Dart GT has helped matters some, but apparently Auburn Hills doesn't think it's quite enough.
If rumors are to be believed - get that salt ready - a possible solution may be in the works. A report from Allpar is claiming that Dodge is considering fitting a Pentastar V6 into the Dart's engine bay. As the Mopar-obsessed website points out, the critically acclaimed Pentastar is available in three different sizes - 3.0 liters, 3.2 liters and the original 3.6 liters. We don't get the 3.0 here in the US, but the 3.2 can be found in the new Jeep Cherokee and the 3.6 has been seemingly fitted to every model Chrysler can shoehorn it into.

Dodge Viper returning to Le Mans this year?

If you were among the fans disappointed by Chrysler's recent decision to end the Dodge Viper's racing program, we may have some good news for you, as the racing outfit behind the campaign is reportedly working to bring the American supercars back to Le Mans this year. That racing outfit is Riley Technologies, a constructor perhaps best known for its Daytona Prototypes, but it has also prepared its share of GT racers, too. Chrysler charged Riley with leading its racing program for the new Viper GTS-R, campaigned it in the United SportsCar Championship and the 24 Hours of Le Mans. Auburn Hills made the unfortunate decision back in March to pull its Vipers out of Le Mans, and then in October to withdraw from the US series, as well, thereby effectively ending the program altogether. Disappointed though it surely was, Riley remains defiant. The North Carolina-based company is planning on taking the existing Vipers back to Le Mans on its own, with or without factory support. The Viper has, after all, proven a capable machine, having taken both the drivers' and teams' titles in the United SportsCar Championship this past season. "With Le Mans, every driver and every manufacturer needs to have their first trip there, and it isn't always what you want it to be, but we did show reliability and did have some pace," Bill Riley told Racer.com. "Since then, we've worked hard on the cars, they're now strong, front-running cars in the US, and we're working with the ACO on the BoP to make sure the cars are strong at Le Mans. They're super-reliable and fast, and we'd expect to be right in the mix with the other cars." Riley has kept the existing support staff in place, and once it secures its driver lineup and sponsors, chances look good that it could represent America well at Le Mans this year in either the GTE Pro or GTE Am class. Its predecessor did, after all, complete a three-year winning streak that saw it dominate the GTS class right up until its withdrawal in 2000. News Source: Racer.comImage Credit: FCA Motorsports Dodge Coupe Racing Vehicles

Special Dodge Challengers get Hellcat bits to celebrate Mopar's 80th birthday

This year, Mopar is celebrating its 80th anniversary, and it's doing so in two-tone style with this very limited edition Dodge Challenger. Only 160 of these Challengers will be built, with 80 in each paint scheme. Buyers can choose between either Billet Silver or the slightly painful sounding Contusion Blue, each of which gets a hand-painted Pitch Black top half. These Challengers are based on the existing 392 Shaker package, but come with an array of upgrades and tweaks. In addition to the custom two-tone paint, the shaker scoop and rear spoiler are painted in the same color, rather than the usual matte black. The cars come with 20-inch wheels and hand-painted 392 logos on the fenders. The 392 cu. in., or 6.4-liter if you prefer, engine produces the same 485 horsepower and 475 lb-ft of torque as its normal counterpart. This Mopar Challenger will have more access to cold air, though, since it has both the shaker scoop and the headlamp intake from the Challenger Hellcat. At the back, there's also exhaust tips borrowed from the most hellish of Challengers. Or at least the most hellish, so far. View 14 Photos Inside, the changes are more minor. Performance seats are added with embroidered Mopar logos in the backrests. The seats and other trim also feature a silver-colored Tungsten stitching. Naturally, a serial number badge makes an appearance inside, too. Owners will also receive a little box of goodies including a booklet, signed rendering, keychain, additional badge, and a certificate showing the date of manufacture. The overall package is rather attractive, but it isn't cheap. To own one of the few Mopar Challengers, you'll have to fork over $56,885. That's a significant premium over the 392 Scat Pack Shaker, which starts at just $44,890 and makes just as much power. You'll also be able to get a 392 Scat Pack Shaker right away, while the Mopar special edition won't be out until spring. Plus, you may not get it until summer because the hand-painting process takes some time. Of course, for some people, the cost and the wait are worth the exclusivity. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.