2011 Dodge 392 Challenger Srt 8 Inaugural Edition 1,400 Miles, Mint on 2040-cars
Arlington Heights, Illinois, United States
Inaugural Edition Model Features Exclusive Content • Introduction of legendary 392-cubic inch HEMI® V-8 for the street, an engine with a famous name but is a decidedly high-tech, modern engineering masterpiece Potent 392 HEMI V-8 balances brawn with brains, features an active intake manifold, variable-cam timing and Fuel Saver technology (four-cylinder mode) on automatic transmission-equipped models • Significant horsepower and torque gains are just part of the muscle coupe's balanced performance story as a redesigned suspension tuning delivers new driving manners • 1,492 Inaugural Edition models will be built with exclusive interior and exterior appointments For 2011, the Dodge brand's ultimate modern American muscle coupe receives a big boost in power and performance. And the product story goes beyond the impressive horsepower and torque lurking under the hood. The new Dodge Challenger SRT8 392 builds on its original mantra of a rear-wheel-drive coupe that promises a balanced approach between form and function, with impressive straight-line acceleration and world-class ride and handling to go along with high-performance braking and the latest technology that delivers improved fuel efficiency. The result is the newest version of the quickest coupe in the Dodge lineup packed with modern amenities and features performance enthusiasts will love. 'We listened to our devoted, loyal Dodge customers, and this new Dodge Challenger SRT8 392 answers their call for more power off the line,' said Ralph Gilles, President and CEO -- Dodge Brand, Chrysler Group LLC. 'We consciously tuned the 392 for a lot more torque, as that is what truly creates the thrust that sets you back in the seat and keeps you there! We can't wait to see our customers' reactions when they get behind the wheel and put their foot on the throttle -- it is so responsive and a blast to drive.' New 392 HEMI® V8 Offers Wide Torque Range The return of the legendary 392-cubic inch HEMI® powertrain back to the street in the Dodge Challenger SRT8 392 provides another step in showcasing the evolution of the performance brand. Pumping out 470 horsepower and 470 lb.-ft. of torque, the newest HEMI engine in the SRT product lineup provides an additional 90 lb.-ft. of torque at 2,900 rpm versus the previous 6.1-liter V-8 engine. The added torque allows for inspired standing starts and improved straight-line performance while new, performance-tuned motor mounts improve idle stability and ride control at any speed. An active intake manifold and high-lift camshaft with cam phasing provides maximum low-end torque while optimizing high-end power. The 2011 Dodge Challenger SRT8 392 is available with either the standard five-speed automatic transmission with Auto Stick or an available Tremec TR-6060 six-speed manual transmission that was first offered on the 2008 Dodge Viper SRT10®. An improved heavy-duty clutch provides easier shift engagement. Like the original 392 HEMI, the performance on the street and at the track is sure to turn heads with numbers such as 0-60 mph in high 4-second range and quarter-mile elapsed time in the high 12s. New for 2011 is the Fuel Saver technology in automatic transmission equipped models, which allows the engine to operate economically on four cylinders or use all eight cylinders when needed. Under the hood, unique valve covers with painted silver ribs and the '392 HEMI' logo give the HEMI powerplant a clean, yet aggressive look. A redesigned SRT-tuned exhaust system results in a deeper, throatier note that will surely create envious onlookers both during daily commutes and at the race track. Challenger SRT8 392 Inaugural Edition Offers Exclusivity To kick off production of the 2011 Dodge Challenger SRT8 392, 1,492 Inaugural Edition models (1,100 for the U.S. and 392 for Canada) will be produced featuring exclusive exterior and interior content. On the exterior, two colors and new full-body stripe combinations are available on all Inaugural Edition models: Deep Water Blue with standard Stone White stripes or Bright White Clear Coat with standard Viper Blue stripes. For the first time, the front grille features a body-color grille surround. Unique '392 HEMI' badges flank both fenders touting the historically significant V-8 engine that remains true to its high-performance roots and powers the highest rated Challenger in terms of horsepower and torque ratings. From the rear, the Mopar® quad exhaust tips deliver the performance exhaust note while adding the styling cue of a serious muscle car. The Challenger SRT8 392 Inaugural Edition rides on standard 20-inch SRT exclusive wheels that feature a polished face and satin black painted pockets. The race-inspired interior of the Challenger SRT8 392 Inaugural Edition begins with standard Smooth Pearl White leather-trimmed seats and dual blue stripes accented by unique blue stitching. Each of the front seats features an embroidered '392' just below the headrest. The center instrument panel, center stack and console bezels feature a silver metal brush finish for a clean yet high-performance look and feel. The door trim panels also feature silver metal brush grab handles inside Pearl White door bolsters with unique blue accents. An exclusive, serialized 'Inaugural Edition 392 HEMI' dash plaque, showing the sequential build number from 1 to 1,492 rounds out the exclusive interior content. Ultimate Modern American Muscle Coupe The exterior styling of the 2011 Dodge Challenger SRT8 392 remains unmistakably Dodge, with proportions that evoke a bold, instantly recognizable vehicle that has a wide, stable stance on the road. A larger front splitter and integrated front fender spats improve overall high-speed aerodynamics and overall balance. Top speed has been increased to more than 180 mph with the manual transmission (173 mph in the automatic). A newly modified front fascia chin spoiler improves aerodynamics and is accent painted for a more aggressive look. The rear deck-lid spoiler also is completed in matching body color. New Interior Styling Will Delight The precise performance handling of the Challenger SRT8 392 comes to life through a new, right-sized, three-spoke §teering wheel that features a carbon fiber accented leather wrap and silver metallic painted spokes at the 3-, 6- and 9 o'clock positions. The trapezoidal instrument panel features a four-bomb gauge cluster with chromed accent rings and unique, new for 2011 SRT graphics. Inside the cluster, the SRT-exclusive Electronic Vehicle InformationCenter (EVIC) with performance pages provides the driver with trip information, multimedia information from the Media Center radio, along with instant feedback on 0-60 mph time, 60-0 mph braking, G-forces, one-eighth mile and quarter-mile times. Power lumbar-equipped front seats are standard on all Challenger SRT8 392 models. It's also much easier to get in and out of the rear seat. The driver's seat now features seatback tilt with memory and an easy to reach release handle, while the front-passenger seat adds tilt and slide with memory, which makes it even easier to use. Maximum Performance Handling For Road And Track Vital Stats Engine : 6.4 L., 8-cylinder Power: 470 hp Torque: 470 ft-lbs 6-speed Manual, Automatic New, highly damped shocks offer a firm ride that maintains the feel for everyday commuting while being fully capable for the more challenging situations. SRT engineers recalibrated the suspension geometry to improve Challenger's balance, cornering ability and §teering responsiveness. Quicker §teering ratios and new negative camber settings all around dramatically improve Challenger's appetite for high-speed cornering. The performance SRT-tuned, fully-hydraulic §teering system also has been improved with a new, heavy-duty pump and revised gearing to give drivers more direct feel and on-center response. The result: the 2011 Challenger SRT8 392 is capable of .93g on the skid pad -- the most of any production Challenger and on par with some of the world's best-handling performance coupes. 392's Storied History The original 392 HEMI engine was introduced in the new 1957 model year Chrysler and Imperial products. It replaced the 354 cubic-inch version of the original HEMI launched in 1951.Compared with the 354 engine, the 392 was completely revised and improved, with larger valves and ports, a beefier block and crankshaft and improved bearings. In short, the 392 HEMI, often affectionately referred to simply as the '92,' was perfect for drag racing. More than a few racers at that time immediately enhanced the performance of the newest HEMI by bolting on six or eight carburetors, installing new camshafts, etc., and went racing. Racing legend Don 'Big Daddy' Garlits ran a 392 in his infamous Swamp Rat I dragster at record speeds of faster than 180 mph on nitro with no supercharger. Garlits also used a 392 HEMI to officially break the 200-mph barrier when his Swamp Rat went 201.34 mph at Atco, N.J., in 1964. But the 392's success went beyond the drag strip. It also set records at the Bonneville Salt Flats and in boat racing. Drag racing boats were no different than their land-based counterparts in the use of the 392. Famous HEMI engine builder Keith Black was better known on the water than on the land, until he teamed up with Tommy Greer and hired Don 'The Snake' Prudhomme to dominate Top Fuel in California in the early 1960s using a 392 HEMI. After 1958, the 392 HEMI was gone as a production engine, but it still remains a legend. Collectors are now preserving many historic 392-powered race cars and hot rods and proudly displaying them on show car circuits. In 2007, Mopar -- Chrysler Group LLC's service, parts and customer-care brand -- helped celebrate the 50th anniversary of the original 392 by launching a modern, crate engine version of the 392 HEMI. Source - Dodge |
Dodge Challenger for Sale
Srt8 with vortec supercharger dyno tuned to 687 hp, corsa exhaust ec(US $42,000.00)
1973 challenger with 400
2010 dodge challenger srt, 6.1-liter, hemi-v8, 425hp, custom show car(US $58,000.00)
Certifed 6.1 liter v8 6 speed manual navigation kicker sound clean carfax
2008 dodge challenger srt8
1970 dodge challenger r/t se 440 magnum orange metallic/black leather
Auto Services in Illinois
Z & J Auto Sales ★★★★★
Wright Automotive Inc ★★★★★
Wheatland Automotive Inc ★★★★★
Value Services ★★★★★
V & R Auto & Truck Repair ★★★★★
United Glass Co ★★★★★
Auto blog
Weekly Recap: Ferrari plans to gradually increase production by 2019
Sat, Oct 17 2015Ferrari has long been known for the exclusivity of its performance machines. It's on a different level than Porsche, BMW, and Mercedes. But as it transitions to a new era of independence from Fiat Chrysler, Ferrari is going to get a little less exclusive. It's by design, and it means a subtle, slow ramp-up of production – a move Ferrari believes will ensure its future by meeting growing demand in new markets. The strategy was detailed in SEC documents filed this month as part of the company's pending stock offering. The files reveal Ferrari will gradually increase shipments to about 9,000 units per year by 2019. This is a reversal of Ferrari's 2013 plans to cap production at 7,000 cars annually, which it hit on the nose that year. Ferrari shipments inched up to 7,255 in 2014, though that's down from 2012's record tally of 7,405. Ferrari is a vastly different operation than it was in 2013. Longtime chairman Luca di Montezemolo stepped down last fall, and FCA chief executive Sergio Marchionne has been overseeing the company since then. Its IPO has attracted high levels of attention from enthusiasts and investors. As expected, demand has reportedly outstripped the availability of the stock, which has an estimated offering price of $48 to $52 a share. Speaking of more Ferraris, the company revealed a limited-edition model this week called the F12tdf (shown above). Based on the F12 Berlinetta, the car is a salute to the Tour de France endurance auto race that Ferrari dominated in the 1950s and '60s. The V12 engine's output increases to 769 horsepower, while weight is cut by 243 pounds – allowing for a sprint to 60 mph in 2.9 seconds. Dramatic carbon-fiber elements and a radical redesign of the body panels give the F12 a more dramatic look. It will be limited to 799 units over the life of the car. If this is how Ferrari is increasing production, we're more than okay with the company's new strategy. OTHER NEWS & NOTES Tesla software unlocks Autopilot features Tesla released the latest version of its software for the Model S this week, which allows the all-electric sedan to drive in a semi-autonomous state called Autopilot. Tesla Version 7.0 enables the Model S to maintain lane position, change lanes by touching the turn signal, and manage the car's speed using an advanced, traffic-sensing cruise control. It also has a parallel parking feature, which searches for open spots and then parks your Tesla.
China's Great Wall confirms its interest — in Jeep, or all of FCA
Tue, Aug 22 2017HONG KONG/SHANGHAI — Chinese automaker Great Wall Motor reiterated its interest in Fiat Chrysler Automobiles NV on Tuesday, but said it had not held talks or signed a deal with executives at the Italian-American automaker. China's largest sport utility vehicle manufacturer made a direct overture to Fiat Chrysler on Monday, with an official saying the company was interested in all or part of FCA, owner of the Jeep and Ram truck brands. Automotive News first reported the news, quoting Great Wall Motor President Wang Fengying as saying she planned to contact FCA to discuss acquiring the Jeep brand specifically. Those comments sent FCA shares higher but also raised questions over the ability of China's seventh-largest automaker by sales to buy larger Western rival FCA, or even Jeep, which some analysts value at as much as one-and-a-half times FCA. Great Wall sought to dampen speculation on Tuesday. It confirmed it had studied Fiat Chrysler, but said there was "no concrete progress so far" and "substantial uncertainty" over whether it would eventually bid. "The company has not built any relationship with the directors of FCA nor has the company entered into any discussion or signed any agreements with any officer of FCA so far," the company said in an English-language stock exchange filing. It did not give further detail. Fiat Chrysler stock dipped on the statement on Tuesday. Great Wall said trading in its Shanghai-listed shares would resume on Wednesday after having been suspended. Fiat Chrysler declined to comment on Great Wall's statement. On Monday, it said it had not been approached and was fully committed to implementing its current business plan. FLUSHING OUT RIVALS? Great Wall Motor, which was early to spot China's love of SUVs, had revenue of $14.8 billion last year and sold 1.07 million vehicles - but that compares with FCA's 2016 revenue of 111 billion euros ($130.6 billion). Analysts said Great Wall would need to raise both debt and equity to complete any deal, meaning its chairman Wei Jianjun could lose majority control. One possible scenario, according to analysts at Jefferies, would see Wei keeping a roughly 30 percent stake, while Great Wall would raise $10-$14 billion in debt and $10 billion in equity - hefty for a group currently worth just $16 billion. Ultimately, politics could be the clincher.
Dongfeng and PSA extend Chinese joint venture
Thu, Dec 19 2019BEIJING/PARIS — China's Dongfeng and Peugeot maker PSA are extending their business cooperation, despite the Chinese company reducing its stake in PSA to help smooth the French carmaker's merger with Fiat Chrysler Automobiles (FCA). Dongfeng said on Thursday it had agreed with PSA to extend the duration of their joint venture Dongfeng Peugeot Citroen Automobiles (DPCA). Under the deal, the venture could get the rights to PSA's new brands in China and will benefit from new technologies and intellectual properties, the Chinese company said. PSA was not immediately available for comment. The announcement comes a day after the companies said Dongfeng would reduce its 12.2% stake in PSA by selling 30.7 million shares to the French company. Analysts said the move could smooth U.S. regulatory approval for PSA's roughly $50 billion (GBP38.97 billion) merger with Italian-American carmaker FCA. The sale of Dongfeng's shares in PSA, worth around 680 million euros ($757 million), will leave the Chinese group holding around 4.5% of the merged PSA-FCA, which is set to become the world's fourth-biggest carmaker by sales volumes. "As the cooperation between Dongfeng and PSA deepens, we expect the joint venture to continue making good progress in China," a Dongfeng representative said. On a conference call, Dongfeng said DPCA would have exclusive rights to PSA's Opel cars should the partners agree to bring the brand to China, and enjoy lower prices on car parts imported from PSA. Earlier this year, a document seen by Reuters showed Dongfeng and PSA plan to cut jobs at Wuhan-based DPCA and reduce its number of car plants to try to make the venture more profitable. Chrysler Dodge Fiat Jeep RAM Citroen Peugeot China FCA PSA Dongfeng