2010 Dodge Challenger Srt8 Plum Crazy 6.1l Hemi 6-speed 000002 Miles on 2040-cars

Auto blog

How to update and secure a vulnerable Chrysler Uconnect system

If you own one of the 1.4 million vehicles affected by the recent Chrysler software recall, you may want to watch this video. In it, we explain how to get the latest infotainment software loaded onto the 8.4-inch Uconnect system. The recall was a response to the findings of researchers who were able to hack into and remotely control a 2014 Jeep Cherokee through its cellular connection. Although Fiat Chrysler has worked with Sprint to plug most of the holes on the carrier side, there are still some vulnerabilities that only this latest software version can patch. Owners have three options to get the update: download it now, wait for a USB stick in the mail, or take the vehicle to an FCA dealer. Chrysler will be sending USB sticks loaded with the software update to customers. Anyone with an internet connection and a USB stick of their own with at least 4 GB capacity can speed things up by downloading the patch from the Uconnect website. We cover that process from start to finish in the video, with the final portion still applicable to those using the FCA-supplied USB stick. If after watching this you still don't want to tackle the patch yourself, you can take your vehicle to the dealer to have it done. Also note that this process is the same for all Uconnect updates, not just the one patching the exploits. Our demonstrator vehicle is a 2015 Ram 1500 pickup. The procedure should be very similar on other products with the 8.4-inch Uconnect system, with only the location of the USB port varying. Once you have the USB stick with the software on it – either after having downloaded it yourself or receiving it in the mail from Chrysler – the installation process is relatively simple. It takes about 15 minutes to perform the update; we edited out the wait in the video. To check whether or not your car's 8.4-inch Uconnect system is running the latest software, go to System Information on the touch screen's Settings page and look at Software Version. The update related to the recall is version 15.17.5. Related Video: Recalls Chrysler Dodge Jeep RAM Safety Technology Infotainment Videos Original Video hacking

FCA's large, LX-based RWD cars will stick around until 2020

Fiat Chrysler Automobiles plans to stick with the Dodge Challenger, Dodge Charger, and Chrysler 300 until at least 2020, reports Automotive News. The information comes from two unnamed sources and was loosely confirmed by details in the automaker's new labor contract with Unifor, Canada's auto union. The plan, according to two anonymous sources, is to lightly refresh the Challenger, Charger, and 300 until the vehicles make the switch to FCA's new Giorgio platform. The refresh, as Automotive News points out, will happen in 2018. The Giorgio platform currently underpins the Alfa Romeo Giulia and is expected to find its way to two of the three large American vehicles for the 2021 model year. At that time, FCA will discontinue either the Charger or the 300, claim AN's unnamed sources. If one of the vehicles were to go, it would most likely be the 300. The 300's LX platform would be approximately 15 years old in 2020 and the vehicle doesn't draw in as many sales as the Challenger or the Charger. The Charger made the switch from the LX platform in 2010 with the current model utilizing the mildly updated LD platform, while the Challenger recently moved from the LC platform to the LA platform last year. All of those rear-wheel-drive platforms are closely related. Automotive News points out that FCA CEO Sergio Marchionne stated that the new platform could be utilized across various applications in a conference call with analysts last month. The plan, according to the report, is to stretch and widen the Giorgio platform for the next-gen Challenger and Charger. The new platform is also rigid enough to allow the automaker to add a convertible to its lineup, which could lend further credence to rumors of an upcoming Barracuda. Hopefully, the move to the new Giorgio platform doesn't delay the all-wheel-drive Challenger GT AWD or the wide-body, Hellcat-powered Challenger ADR. We'll just have to wait and see. Related Video: News Source: Automotive News - sub. req. Chrysler Dodge Coupe Performance Sedan FCA fiat chrysler automobiles

Dodge engineers trying to shoehorn Pentastar into Dart?

The fact that the Dart's launch has been a pretty dismal affair isn't what we'd call secret. Judging by its mounting inventories and poor critical reception, Dodge's successor to its unloved Caliber has struggled since it hit the market. And while both of those are difficult problems to address, at least their cause is well known - the powertrain.
Even Fiat-Chrysler CEO Sergio Marchionne has acknowledged that the powertrain options in the Dart are substandard, admitting at January's Detroit Auto Show that the powertrains are "less than ideal." Leading with the 1.4-liter turbocharged four-cylinder found in the Fiat 500 Abarth left a bad taste in the mouths of consumers thanks to the laggy engine and dead throttle response (to say nothing of the manual and dual-clutch gearboxes that needed more refinement). The addition of the 184-horsepower 2.4-liter Tigershark in the Dart GT has helped matters some, but apparently Auburn Hills doesn't think it's quite enough.
If rumors are to be believed - get that salt ready - a possible solution may be in the works. A report from Allpar is claiming that Dodge is considering fitting a Pentastar V6 into the Dart's engine bay. As the Mopar-obsessed website points out, the critically acclaimed Pentastar is available in three different sizes - 3.0 liters, 3.2 liters and the original 3.6 liters. We don't get the 3.0 here in the US, but the 3.2 can be found in the new Jeep Cherokee and the 3.6 has been seemingly fitted to every model Chrysler can shoehorn it into.