1970 Dodge Challenger on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge rolls out Shaker package for 2015 Challenger

Having an awesome Hemi engine under the hood can deliver impressive performance, but for those who lament not being able to see that big V8 engine doing its thing, hidden away under the hood, Dodge offers the Shaker hood on its Challenger muscle car. And it's just released the option for the updated 2015 model. Now available on two engines and three trim levels – including the Challenger R/T and R/T Plus with the 5.7-liter V8 and the 6.4-liter Challenger 392 – the new Shaker hood brings cold air into the engine compartment and lets everyone see that V8 (or at least an appendage thereof) shaking away in plain view. Arriving 45 years after the original Shaker Challenger, the package includes a satin black hood scoop, cold-air intake, conical air filter and optimized air box, along with Shaker graphics inside, out and under the hood. The 2015 Dodge Challenger R/T Shaker and R/T Plus Shaker are available to order now, priced at $35,495 and $38,495, respectively (plus a $995 destination charge), and come bundled with the Super Track Pak. Order books open in March for the 392 HEMI Shaker, which also comes with the Scat Pack, for $42,495 (plus destination and $1,000 gas-guzzler tax if equipped with the manual transmission). Dodge is Shaking Up the Muscle Car Segment Again; Opens Orders for New 2015 Challenger 'Shaker' Models Dodge Celebrates 45 Years of Its Functional "Cold-air Grabbing" Hood Scoop That "Shakes" With the Legendary HEMI® V-8 Engine's Movement - Back by enthusiast demand, Dodge returns the "Shaker" to the Challenger lineup – now expanding the functional cold-air induction hood scoop on two HEMI V-8 engines and three performance-packed models - "King of the Shakers" – all-new 2015 Dodge Challenger 392 HEMI Scat Pack Shaker combines the ultimate combination of 485 best-in-class horsepower and legendary Dodge heritage cues with a functional Shaker hood - Dodge Challenger R/T Shaker and R/T Plus Shaker models feature the legendary 5.7-liter HEMI V-8 engine with unique hood and intake design combined with a functional exposed-element cold-air intake system - New 2015 Dodge Challenger R/T Shaker and R/T Plus Shaker are available for ordering now, with the 392 HEMI Scat Pack Shaker model available for customer orders in March February 13, 2015 , Auburn Hills, Mich.

Chrysler recalls 350k vehicles over ignition switches

Chrysler has announced a recall covering 349,442 vehicles due to ignition switches that can either become stuck or move without warning. All of the affected vehicles are from the 2008 model year, and were built before May 12, 2008.
The automaker has learned that ignition keys on some vehicles "may not fully return to the 'ON' position after rotation to the 'START' position during engine-startup," the company said in a statement. Additionally, "an ignition key may not fully return to the 'ON' position after rotation to the 'START' position and may inadvertently move through the 'ON' position to 'ACCESSORY' or 'OFF.'"
Chrysler says it is unaware of any related injuries, and notes that while reduced braking, engine or steering power is possible in such instances, the airbags are not affected. The later stands in contrast to General Motors' recent rash of high-profile recalls, and it's an important distinction that Chrysler (understandably) felt necessary to call out in bold print in its press release.