Heat Hatchback 2.0l Cd 4 Wheel Disc Brakes Abs Brakes Am/fm Radio Brake Assist on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

2015 Dodge Challenger SRT 392

I've just started reading the third installment in a planned five-book biography of Lyndon Baines Johnson, Master of the Senate, written by the incomparable Robert Caro. Conveniently, a recent trip to drive the BMW X6 M and 228i Convertible was to be staged in Austin, TX, within easy driving distance of LBJ's birthplace, Johnson City. And yes, the city is named for his family. Having completed my duties with the Bimmers, I borrowed the spangled 2015 Dodge Challenger SRT 392 you see above, to squire me around the Texas capitol for a weekend, and as a lift out to the Hill Country homestead of our 36th President. Johnson City isn't exactly a road trip mecca, but there's a pretty good brewery, a museum, the reconstructed LBJ house to take snapshots of, and it's a nice drive to get out there if you've got a 485-horsepower muscle car at your disposal. Driving Notes With the heroic Hellcat, this 392 and the R/T Scat Pack (that Brandon Turkus reviewed recently), there are more SRT-treated Challengers to choose from than ever before. There are 707 obvious reasons that the Hellkitty is the top dog (as it were), but there are important difference between this 392 and the Scat Pack, too. Both cars make use of the 6.4-liter Hemi V8 putting out 485 horsepower and 475 pound-feet of torque, but the 392 also gets an adaptive suspension, six-piston Brembo brake calipers (instead of four-piston), wider tires, leather and Alcantara seats, a heated steering wheel, a louder stereo and HID headlights. When LBJ was campaigning for his seat in the House of Representatives, he would've loved to have something as potent as this monster of a V8 under the hood of his canvassing car. The 6.4L snorts with authority before it sends the big coupe forward to just about any speed I'd ask of it, and with a quickness. Johnson was known for haranguing drivers to step on it, when all that stood between himself and a few more votes was the ability to fit one more stump speech into the day. The 392 feels as though it could cover a quarter of the state of Texas in a morning if you throttle down deep enough (faster even than the Johnson City Windmill, I'd guess). Though there's a six-speed manual available, I'm actually quite fond of the eight-speed automatic in the 392. The two-pedal setup better suits the fast-cruiser attitude of the car, and it never served up any poorly conceived shift logic when I left it in D. Of course, the roads are better now than they were in the 1930s and 40s, too.

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.