Good Condition Drives And Runs Good Nice And Clean on 2040-cars

Auto blog

26k Chrysler 200 models recalled over parking woes

Chrysler is recalling nearly 26,000 of its 2015 200 sedans after customers reported that cars aren't shifting into park. Only vehicles equipped with the 3.6-liter V6 are affected by the recall, which includes both front-drive and all-wheel-drive models (which could represent as much as 20 percent of the recalled vehicles). The roughly 26,000 vehicles were built between March 17, 2014 and September 20, 2014. As for where those vehicles can be found, 22,107 were sold in the United States. The remaining vehicles went to Canada and Mexico, with 3,600 in the former and 213 in the latter. Chrysler is blaming the recall on "inconsistent assembly procedures" at a supplier's factory, and will replace the transmissions of any vehicles affected by the defect. Owners of V6-powered 200s are being told to use their parking brake in addition to shifting into park. Although five incidents have been reported, FCA isn't aware of any injuries or accidents. Scroll down for the brief press release. Statement: Park Engagement February 26, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a recall of certain model-year 2015 cars to resolve manufacturing issues that may prevent the vehicles from shifting into park. Inconsistent assembly procedures at a supplier's plant have been linked to five reports involving customers who could not shift their vehicles into park. Without park, a vehicle may be subject to inadvertent movement. FCA US is unaware of any related injuries or accidents. The campaign is limited to the Chrysler 200 equipped with a V-6 engine. There are an estimated 22,107 in the U.S.; 3,600 in Canada and 213 in Mexico. Customers will be advised when they may schedule service. FCA US dealers will inspect and, if required, replace transmissions at no charge. In the interim, customers who own models with V-6 engines are advised to activate the vehicle's parking brake before shutting off its engine, because the shifter may incorrectly indicate park is engaged. Customers with additional concerns may call 1-800-853-1403. Related Video:

FCA recalls Fiat 500e to fix cruise control

Fiat is recalling almost 4,000 of its 500e electric vehicles because of a malfunction related to the model's cruise-control feature. The glitch causes the car's powertrain to be put into neutral under certain situations. It's the second recall on the 500e this year. Specifically, Chrysler-Fiat is recalling 3,975 cars. The issue is that the car's system can misread the motor's torque figures in cruise control, causing the sprightly EV to mistakenly shift into neutral in what was designed as a safety-precaution measure. The good news is that restarting the vehicle gets the car back to normal, but being dropped into neutral in highway mode is certainly no fun. Chrysler-Fiat said in a statement this week that it was "unaware" of injuries, accidents, or customer complaints caused by the issue. In April, the 500e was subject to a recall that impacted about 5,600 vehicles and stemmed from a March 2015 update. The update allowed the car to go into so-called "Limp Home Mode" to better extend range. The problem is that it inadvertently caused the car to stall. Range anxiety, indeed. Take a look at Chrysler-Fiat's press release on the most recent recall below. Related Video: Statement: Software Upgrade June 9, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 3,975 cars to upgrade cruise-control software. A review of warranty data led to an investigation by FCA US LLC engineers. The investigation discovered certain Fiat 500e hatchbacks were inadvertently equipped with software that may misread torque levels generated by their motors, causing them to shift into neutral – a prescribed failsafe mode. This condition may occur only while cruise-control is engaged and the driver attempts to override the feature with accelerator-pedal applications or rapid tapping of the accelerate/decelerate buttons. Restarting the vehicle restores normal function. The campaign is limited to certain model-year 2013-2015 vehicles. The Company is unaware of any related injuries, accidents or customer complaints. New software will be available when affected customers are advised of this action by FCA US. Service instructions are being sent to FCA US dealers today. Customers with questions may call the FCA US Customer Information Center at 1-800-853-1403.

Dodge Challenger spied exercising supercharged Hellcat Hemi V8

One of the prime complaints against the Dodge Challenger is that, even in SRT8 guise, its 470 horsepower is responsible for hauling over 4,200 pounds of vehicle. For comparison, the 420 hp in the Ford Mustang GT only has to deal with 3,618 lbs. Things only get worse from there, as the higher-performance variants of both the Mustang and the Chevrolet Camaro are far more powerful than an SRT8 without adding on much heft.
So what is Chrysler to do? The correct answer is add a whole lot more grunt to its hefty two-door and even the odds. That's where the all-new Hellcat engine comes into play. We reported on this engine in May, and suggested that the Hellcat, a supercharged powerplant based on a 6.4-liter V8, would easily generate 500 to 570 hp and could likely arrive boasting more than 600 ponies.
Chrysler's ace in its sleeve has now been spied testing, with a number of Hellcat-equipped Challengers running the potent new engine both in more urbanized areas and under the sun of Death Valley. The hoods on these testers have been raised to accommodate the engine, and that camouflage over the fascias of these prototypes is there to hide a larger air intake. We also note what appears to be a new split grille under wraps. As for power output, our spies are now suggesting a Viper-equalling 640 hp from the Hellcat-equipped cars.