2014 Chrysler Town & Country Touring-l on 2040-cars

Auto blog

26k Chrysler 200 models recalled over parking woes

Chrysler is recalling nearly 26,000 of its 2015 200 sedans after customers reported that cars aren't shifting into park. Only vehicles equipped with the 3.6-liter V6 are affected by the recall, which includes both front-drive and all-wheel-drive models (which could represent as much as 20 percent of the recalled vehicles). The roughly 26,000 vehicles were built between March 17, 2014 and September 20, 2014. As for where those vehicles can be found, 22,107 were sold in the United States. The remaining vehicles went to Canada and Mexico, with 3,600 in the former and 213 in the latter. Chrysler is blaming the recall on "inconsistent assembly procedures" at a supplier's factory, and will replace the transmissions of any vehicles affected by the defect. Owners of V6-powered 200s are being told to use their parking brake in addition to shifting into park. Although five incidents have been reported, FCA isn't aware of any injuries or accidents. Scroll down for the brief press release. Statement: Park Engagement February 26, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a recall of certain model-year 2015 cars to resolve manufacturing issues that may prevent the vehicles from shifting into park. Inconsistent assembly procedures at a supplier's plant have been linked to five reports involving customers who could not shift their vehicles into park. Without park, a vehicle may be subject to inadvertent movement. FCA US is unaware of any related injuries or accidents. The campaign is limited to the Chrysler 200 equipped with a V-6 engine. There are an estimated 22,107 in the U.S.; 3,600 in Canada and 213 in Mexico. Customers will be advised when they may schedule service. FCA US dealers will inspect and, if required, replace transmissions at no charge. In the interim, customers who own models with V-6 engines are advised to activate the vehicle's parking brake before shutting off its engine, because the shifter may incorrectly indicate park is engaged. Customers with additional concerns may call 1-800-853-1403. Related Video:

Detroit 3 and UAW set for showdown over tiered wages

This week, thousands of United Auto Workers will converge on Cobo Center in Detroit for the Special Convention on Collective Bargaining, an every-four-year event that lets members tell UAW leaders what the negotiating priorities should be during contract negotiations. This is where a lot of sand and a lot of lines start coming together in preparation for contract negotiations between the UAW and the Detroit 3 automakers, which will happen later this year. Number one on the UAW agenda is the end of the two-tier wage system created in 2007 to help the automakers get through bankruptcy; veteran workers are paid the Tier 1 rate of around $29.00 per hour, new hires are paid the Tier 2 rate of between $15 and $20 and get about half the benefits of Tier 1. Tier 2 hiring has been an undoubted success for the automakers, allowing them to keep factories in the US and hire more workers. By agreement, it is capped at a certain percentage of each automaker's workforce, and while the union's ultimate position is to get rid of the dual-scale system entirely; one leader said Ford could easily afford the $335 million it would take to convert all its workers to Tier 1 out of its $6.9 billion in 2014 North American profit, and General Motors could do the same out of the $5 billion it is handing to investors through the (admittedly forced) share buyback. Other delegates say that at the very least they'd be happy with enforcement of the current caps in the new contract. The automakers, conversely, would welcome expansion of the Tier 2 ranks. Including benefits, import automakers pay workers "in the high $40 range" per hour, according to an analyst, while Ford and GM pay about $59 in wages and benefits per hour. More Tier 2 workers on the rolls would let those two companies get labor cost parity with the competition. Fiat-Chrysler pays wages closer to the imports because of special exceptions in its UAW contract that allow unlimited Tier 2 hiring; those exceptions will end on September 14 and bring FCA into line with the other domestics, unless the new contract maintains them. FCA CEO Sergio Marchionne is opposed to the two-tier system, having called it "almost offensive." One analyst says the UAW might win a sizable pay raise for Tier 2 and a small increase for Tier 1, but the keystone issue will be how the hiring matrix can help the automakers keep overall wages in line with the imports.

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.