2014 Chrysler Town & Country Touring on 2040-cars

Auto blog

2017 Chrysler Pacifica Hybrid: The 80-MPGe minivan [w/video]

As automakers rush to add hybrids and plug-ins to every type of vehicle, one popular segment has been overlooked: minivans. If the idea of a hybrid minivan makes sense to you, that's because it's a smart idea, and one that we're surprised hasn't happened yet. So kudos to Chrysler for not just making it happen, but for creating a plug-in version with an estimated 80 miles per gallon equivalent. You can read all the practical details of the 2017 Pacifica (not Town & Country) here. For the sake of this story, we'll focus on what's different with the hybrid model. Yes, Chrysler is just calling it Pacifica Hybrid, not Plug-In Hybrid, because the company's executives think that when people hear "plug" they think "range anxiety" and freak out. That's not a worry here, though, because when the 16-kWh battery runs out of juice, the 3.6-liter Pentastar V6 kicks in and the minivan functions as normal. Just don't run out of gas. With a full charge, the Pacifica Hybrid can travel up to 30 miles on electric power. And though the gas engine is the same 3.6-liter V6 found in the non-hybrid model, it's detuned to 248 horsepower and 230 pound-feet of torque. Charging the battery takes just two hours on a 240-volt plug, and Chrysler houses the battery pack underneath the floor in the middle of the van, where the wells for Stow 'N Go seating are found on gas-only models. So no, you can't get Stow 'N Go seats on the hybrid, but the third row does still fold into the floor. Powertrain aside, the Pacifica Hybrid is nearly identical to its gas-only sibling, save the addition of the charge port on the driver's side front fender. Unique wheels in 17- and 18-inch sizes can be had, and the Pacifica Hybrid only comes in Touring and Limited Platinum trims. You can read more details on the hybrid system in the release below. First hybrid powertrain in minivan segment "Due to its large footprint and multiple daily trip patterns, the minivan is ideally suited for electrification technology," said Bob Lee, Vice President and Head of Engine, Powertrain and Electrified Propulsion Systems Engineering, FCA – North America. "The all-new 2017 Chrysler Pacifica lives up to this promise and then some, with efficiency, power and refinement." Launching in second half of 2016, the Pacifica Hybrid is the industry's first electrified minivan.

2017 Chrysler Pacifica isn't your parents' Town & Country [w/video]

I'm sick of people hating on minivans. There's something about two incredibly functional sliding doors that give people this idea that they've given up, and given in to family life. But if the van you see here had two fixed rear doors, and maybe an extra inch of ride height, it'd be gobbled up like mad as part of the growing crossover craze. So yes, the 2017 Chrysler Pacifica – that's right, Pacifica – is a minivan. But it's so packed full of features, technology, and functionality, that you really ought to look past those sliding doors. There promises to be an incredibly rewarding vehicle within. The 2017 Pacifica rides on an all-new platform, but dimensionally, it's similar to the outgoing Town & Country. That whole "ugh, minivans" thing is one of the reasons why Chrysler decided to axe the Town & Country name for 2017. Simply put, the target customers for the new minivan (young parents) would have grown up in their parents' Town & Country vans (or Caravans, or Voyagers...) in the 1980s. Three decades later, FCA wants to make it absolutely clear that this isn't just your parents' minivan. Why it chose to bring back the name of a lackluster part of its mid-2000s history, though, is anyone's guess. The 2017 Pacifica rides on an all-new platform, but dimensionally, it's similar to the outgoing Town & Country. It's a tenth of an inch shorter in length, about an inch wider, and roughly half an inch taller. The body itself looks great – influence from the 200 sedan is obvious up front, and around back in the taillights, and top-trim models can be had with 20-inch wheels – a big change from the old van, which topped out with 17-inch rolling stock. There's big weight-savings here, too – the Pacifica tips the scales at 4,330 pounds in base spec, which is over 300 pounds less than the Town & Country. Inside, it's more of the same from Chrysler. The interior design uses language brought up from the 200, and the different color and material choices look really rich, especially in Limited Premium trim. Of course, I'll wait to make final judgments on the cabin until I see it in base cloth spec, rife with kid fingerprints and french fries ground into the carpets. Up front, the Uconnect 8.4-inch touchscreen houses familiar infotainment functionality, and for backseat passengers, there's a new Uconnect Theater system, with a pair of 10-inch touchscreen displays.

Final Toledo Jeep decision may have nothing to do with city's efforts

Toledo, OH is doing all that it can to keep production of the Jeep Wrangler in its boundaries, but the biggest issue facing the plant may be insurmountable, no matter how desperately the city wants to keep the Wrangler local. The Wrangler is built in a rather interesting manner at the Toledo Supplier Park: Fiat Chrysler only handles the very final assembly of each vehicle, while two other companies, Kuka, a German firm, and Hyundai-Mobis, a member of the sprawling Hyundai empire, produce the body and chassis, respectively. The vehicles are then transferred over to the FCA part of the park, where they're painted and completed. This was, as The Detroit News explains, a convenient arrangement back in 2006 when the supplier park opened. Chrysler, which was still owned by Daimler at the time, arranged for Kuka and Mobis to handle production, saving it a huge sum of money. Both suppliers own their own machinery and buildings and employ their own workers. Now that FCA is a relatively healthy entity, though, there's not a lot of need to be sharing profits with two other companies. "What [FCA boss Sergio Marchionne] would like is to have the advantages of high-capacity utilization, owning that capacity and taking advantage of that for himself versus having a supplier doing some of the things his competitors do internally," David Cole, chairman emeritus at the Ann Arbor, MI-based Center for Automotive Research, told The News. "It really adds another level of complexity to the situation." While Sergio Marchionne is a man that generally gets what he wants, it seems unlikely that either Mobis or Kuka would give up their role quietly. According to Jon Zapf, Mobis North America's chairperson for UAW Local 12, the company "definitely wants to maintain their part of this production process." According to The News, Jeep is likely to announce the location of next-generation Wrangler production in June. Expect to hear much more on this one in the coming months.