2008 Chrysler Pacifica Touring Sport Utility 4-door 4.0l on 2040-cars
Davison, Michigan, United States
Fast and gas sipping 4.0 V6 engine. Clean, high demand 2008 Chrysler Pacifica Touring Edition with 132,000 miles. Silver exterior. Cloth slate grey interior. Non-smoking. Great family car that seats six comfortably:four bucket seats and third row bench seating! We need to make room for a vehicle with more towing capacity, but are happy to find another family to enjoy this speedy family car.
It runs great and is dependable. The radiator was just replaced and the AC was just recharged. Since purchasing it two years ago, we have also replaced the front brake pads and all four rotors, tie-rod ends, O2 sensors, and installed a new battery. The vehicle has been well taken care of and proactively serviced. Currently, the vehicle needs a throttle body replaced to deal with a mass air flow sensor malfunction causing the vehicle to send catalytic converter efficiency codes. Nothing serious, but we just bought the part from the dealer ($247) and that goes with the vehicle when it is sold. |
Chrysler Pacifica for Sale
Sharp (( awd..touring..3rd row..capt chairs..loaded ))no reserve
(( one owner )) 2007 chrysler pacifica touring sport utility 4-door 4.0l(US $5,100.00)
Clean carfax heated bucket seats sunroof cd changer chromes power pedals we ship(US $9,500.00)
2005 chrysler pacifica touring sport utility 4-door 3.5l
2006 chrysler pacifica base sport utility 4-door 3.5l
2004 chrysler pacifica base
Auto Services in Michigan
Wilkins Auto Sales Inc ★★★★★
White Jim Honda ★★★★★
Wetland Auto Parts ★★★★★
Vinsetta Garage ★★★★★
Viers Auto Sales ★★★★★
Tom Holzer Ford Inc ★★★★★
Auto blog
Stellantis announces ‘Circular Economy’ business to drive revenue, decarbonization
Tue, Oct 11 2022Stellantis has already announced its plans to reach net-zero carbon emissions by 2038. Today, the automaker has announced a new business unit to help it reach that goal while generating 2 billion euros per year in revenue by 2030. The “Circular Economy” business will help make revenue less dependent on finite, rare and ecologically problematic materials. The Circular Economy model features what Stellantis calls a “4R” strategy, comprising remanufacturing, repair, reuse and recycling. The goal is to make materials last as long as they can, reducing reliance on the acquisition of those precious new materials in the future by returning them to the business loop when theyÂ’ve reached the end of their first life. Through these processes, Stellantis says it can save up to 80% raw material and 50% energy compared to manufacturing a new part. Remanufacturing, or “reman” in Stellantis shorthand, means dismantling, cleaning and rebuilding parts to OEM spec. Nearly 12,000 remanufactured parts are available for customers to purchase. Some remanufacturing is done in-house, and some with partners and through joint ventures. Repair is pretty obvious — fixing parts to put back into vehicles. This also consists of reconditioning, to make a vehicle feel like new. Stellantis boasts 21 “e-repair” centers for repairing electric vehicle batteries. Reuse refers to parts still in good condition from end-of-life vehicles sold as-is. Stellantis says it has 4.5 million multi-brand parts in inventory. These are sold in 155 countries through the B-Parts e-commerce platform. Reuse also refers second-life options, such as using batteries outside of automotive purposes. Recycling involves dismantling parts and scraps back into raw material form that is then looped back into the manufacturing process. Stellantis says it has collected 1 million parts for recycling in the past six months. Recycling doesnÂ’t get counted in that aforementioned 2 billion euros of revenue, but it does save the company money on acquisition of raw materials. As for batteries, specifically, Stellantis expects this recycling business to ramp up after 2030, when the packs currently in service begin to reach the end of their lifecycle. Stellantis will use its new “SUSTAINera” label to denote parts that are offered as part of its Circular Economy business.
2015 Chrysler 300 looks to recapture its mojo in LA
Wed, 19 Nov 2014Chrysler's 300 sedan has never been a shrinking violet, but it arguably lost a bit of swagger when its second-generation model bowed. There was no way that an evolutionary design could ever upend the automotive establishment the way the original 2005 model did, but even so, something was clearly left on the table when the 2011 model bowed.
You don't have take our word for it - Chrysler knows it, too. Reflecting back upon the second-generation model's styling today, Ralph Gilles, Chrysler's senior vice president of design is refreshingly candid, telling Autoblog, "Our previous generation of leaders didn't understand the car very well, and kind of forced this front end on us." For 2015, Gilles and Co. have worked to recapture some of the 2005 design's lightning in a bottle. In Gilles' words, the brief for the refreshed 2015 model was to "give the car the attitude it deserves... up the attitude, up the presence."
Visually, the new 300 initially appears very similar to the current car, but closer inspection and side-by-side comparisons reveal countless changes, the most noticeable being a much larger front grille (by about 30 percent), redone light fixtures and a 'Mobius-strip' lower fascia that picks up where the new 200 left off. The cabin has been upgraded, too, with a standard seven-inch display in the gauge cluster, the latest UConnect infotainment system and improved material choices.
FCA seeks partner to keep building Dodge Dart, Chrysler 200
Wed, Mar 9 2016Mere weeks after FCA announced it was shutting down production of the Dodge Dart and Chrysler 200, new hope emerges to give the sedans a stay of execution. Speaking at the Geneva Motor Show last week, Sergio Marchionne said that the company was looking for a partner "who is better at it than we are and who has got capacity available" in order to continue building the models on its behalf. "There are discussions going on now," said Marchionne, according to Motor Trend. "I think we will find a solution. We continue to talk. It's both a technical solution and an economic one. We need to find a solution that works economically." Contracting vehicles to be manufactured offsite is more common practice among European automakers than it is with American ones. Chrysler's former patron Mercedes, for example, has the G-Class built for it by Magna Steyr in Austria, the A-Class by Valmet in Finland, and the R-Class by AM General in Indiana (even though it's no longer sold in the US). This arrangement would, on the surface at least, appear more similar to the deal that Toyota struck with Mazda to build the Scion iA, drawing on the contractor's expertise and capacity to build the small sedan on the client company's behalf. Only rather than basing a new model on one of the partner's existing ones, this deal would ostensibly continue building FCA models on FCA platforms using FCA components. We'll have to wait to find out with whom FCA strikes up the manufacturing deal, but we wouldn't be surprised to see Marchionne turn to a partner he already knows. The company is, after all, at the center of an intricate web of joint ventures and manufacturing contracts. The Fiat 124 Spider, for example, is built by Mazda. The Fiat Sedici that preceded the 500X was built by Suzuki. Models like the Dodge Stealth and Eagle Talon were built in Illinois at the Diamond-Star Motors joint venture before Mitsubishi took it over altogether. And Dodge continued selling the Mercedes-made Sprinter long after DaimlerChrysler split. The Ram ProMaster, though built by FCA in Mexico for the North American market, stems from a partnership in France with PSA Peugeot Citroen. And the ProMaster City is built in a joint-venture plant in Turkey, from which it's also sold by GM as an Opel in Europe and a Vauxhall in the UK. With all those deals coming and going, after all, what would one more add to the complexity?